topic HP Secure Web Console in Operating System - HP-UX

HP Secure Web Console

royalsun — Tue, 27 Apr 2004 00:28:08 GMT

Hi Folks,

I am accessing the SWC using Internet Explorer and have tried to use SAM eg in Single User Mode But the navigate key does not work ie the TAB key File does not work to access the Menu selections such as :

File View Options Actions

I have tried to set TERM as hp / vt100 / vt200 but cannot use the TAB key.Any ideas - all other Forum postings recommend what I have tried but fo me its not working.

Thanks and regards,

Milly

Re: HP Secure Web Console

Steven E. Protter — Tue, 27 Apr 2004 00:34:42 GMT

TERM=hp always worked for me.

You may want to rest and reconfigure the web console.

power it off, hold down the button when powering it up. Then httpd in and chane the settings.

Firmware up to date?

I'm going to have to try this out myself.

SEP

Re: HP Secure Web Console

Bharat Katkar — Tue, 27 Apr 2004 01:00:21 GMT

Could u check with TERM=ansi

Re: HP Secure Web Console

royalsun — Tue, 27 Apr 2004 19:59:17 GMT

Hi Guys,

No luck with resets and ANSI terminal but thanks for the suggestions.

REgards,

Milly

Re: HP Secure Web Console

royalsun — Fri, 30 Apr 2004 00:03:12 GMT

Hi Guys,

I found a work around.After trying many combinations of CTR/SHIFT/TAB etc I foun that by using the F3 and F1 Keys I could end up navigating the menus.Thanks for your responses.

Regards,

Milly