topic Re: armdiscover not responding in Operating System - HP-UX

armdiscover not responding

David Sykes — Thu, 06 May 2004 16:15:38 GMT

after executed #armdiscover -v with VA7100
Failed to obtain remote database interface to host: localhost

As i cant solve problem ?

Thanhs

Miguel

Re: armdiscover not responding

Naveej.K.A — Thu, 06 May 2004 22:32:15 GMT

hi,

ps -ef |grep diald

to check whether diald daemon is running.
else.

cd /opt/sanmgr/commandview/client/sbin
./HA_Dial_Stop
and then
./HA_Dial_Start

With best wishes
Naveej

Re: armdiscover not responding

Keith Bevan_1 — Fri, 07 May 2004 06:48:14 GMT

Miguel

1) Ensure Power/Standby Switch is on

2) Are there any system LEDs on and if so ensure they are all green.
If all LEDS are off check the Enclosure Power Cords at the back of the array

3)Ensure any fibre optic cables are connected to the array as required.

4) cd /opt/sanmgr/commandview/client/sbin
./HA_Dial_Stop
./HA_Dial_Start

5) repeat you armdiscover

Keith

Re: armdiscover not responding

Bernhard Mueller — Fri, 07 May 2004 06:58:46 GMT

Hi,

check this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1083931020372+28353475&thread
Id=469036

Regards,
Bernhard

Re: armdiscover not responding

Bernhard Mueller — Fri, 07 May 2004 06:59:10 GMT

sorry:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1083931020372+28353475&threadId=469036