topic Re: hp-ux ACE 10.20 in Operating System - HP-UX

hp-ux ACE 10.20

Meir Polack — Fri, 28 May 2004 11:25:42 GMT

Hi,

I loaded from the HP site the ACE 10.20 depot file. How can I install it on a system with now operating system or to a system allready loaded with 11i that I want to downgrade.

Thanks

Meir

Re: hp-ux ACE 10.20

Steven E. Protter — Fri, 28 May 2004 11:28:24 GMT

You can not.

If you wish to run 10.20 software, you need to cold install that OS first.

I would however unless you are the US Navy that you not use 10.20 in any way. Its been out of support for nearly a year and isn't anywhere near current.

SEP

Re: hp-ux ACE 10.20

Meir Polack — Fri, 28 May 2004 11:41:31 GMT

Hi,
I can't load on one of the newer system old 10.20 because the system dose't let you.
do yo know ok a way to do so with an old version of 10.20.

regards

Meir

Re: hp-ux ACE 10.20

Patrick Wallek — Fri, 28 May 2004 11:47:34 GMT

Any of the newer 64-bit ONLY hardware absolutely can NOT run HP-UX 10.20.

If you have an older D or K class system then you can install 10.20 on those.

Re: hp-ux ACE 10.20

Meir Polack — Fri, 28 May 2004 11:52:38 GMT

Hi,

What about c3600 and c3000

Re: hp-ux ACE 10.20

Patrick Wallek — Fri, 28 May 2004 11:54:54 GMT

Yes, 10.20 will work on a c3000 or c3600 (see the following link: http://www.hp.com/workstations/risc/standard/operating/support_matrix/update.html ) BUT you MUST have ACE9912 for for the c3600 or ACE9906 or ACE9912 for the c3000.

Re: hp-ux ACE 10.20

Steven E. Protter — Fri, 28 May 2004 11:59:34 GMT

I can't emphasize enough what a bad idea it is to install 10.20 these days. The only option yo u have on OS issues is this forum or paying beaucoup bucks for it.

If ACE is a requirement, you can do the OS first and then install it, but you'll face a difficult road ahead.

SEP

Re: hp-ux ACE 10.20

Meir Polack — Fri, 28 May 2004 12:13:44 GMT

Hi sep,

Thanks for your reply.
I agree to your concerns but I have to run an application that was stop developed on 10.20 and it is running good on older systems.
Talking to the company that develop the software they are recommending to stay with 10.20 because of some changes made on hp-ux 11 and one of the main concern was ftp changes that can cause problems of communication with a photo plotter driven by this application.

Regards