https://community.hpe.com/t5/operating-system-hp-ux/spool-files/m-p/2481922#M18318 Can you see the print jobs when youdo a lpstat? If so, you may be able to just disable zebra, and then enable zebra.<BR /><BR />This oftentimes helps me clear our zebras out when they are having difficulties. Thu, 11 Jan 2001 20:31:52 GMT Tracey 2001-01-11T20:31:52Z https://community.hpe.com/t5/operating-system-hp-ux/spool-files/m-p/2481921#M18317 I had a problem with one of our non-HP network printers (Zebra). So, I went ahead and copied /var/spool/lp/request/printer to printer.old and removed the queue using jetadmin. After re-adding the queue, copying the content from printer.old to printer does not result in printing those spooled files. I know now that I should have used lpmove command to do that. It's too late for that now, however.<BR /><BR />My question is, is it still possible to print those spooled files? When you look inside of them, you can see print control characters so the printer should understand it, right? Everything is a file in UNIX so I don't see why not simple lp -dprinter printer.old/* wouldn't do the job. I haven't tried it yet but I would like to hear what is your take on this..<BR /><BR />Thanks. Thu, 11 Jan 2001 19:30:49 GMT https://community.hpe.com/t5/operating-system-hp-ux/spool-files/m-p/2481921#M18317 Bolek Mynarski 2001-01-11T19:30:49Z https://community.hpe.com/t5/operating-system-hp-ux/spool-files/m-p/2481922#M18318 Can you see the print jobs when youdo a lpstat? If so, you may be able to just disable zebra, and then enable zebra.<BR /><BR />This oftentimes helps me clear our zebras out when they are having difficulties. Thu, 11 Jan 2001 20:31:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/spool-files/m-p/2481922#M18318 Tracey 2001-01-11T20:31:52Z