topic Re: restricted sam in Operating System - HP-UX

restricted sam

Eugene Klaus — Sun, 11 Jul 2004 08:03:18 GMT

I entered this question before and came to no good resolution. I thought I would try again.
I have used sam -r to set up a user with sam
privelege. On one system w/hpux 10.20 all is well. On the second system w/hpux 11.00, one user setup find and works well. All other attempts to setup user with sam privelege fail.

Re: restricted sam

Geoff Wild — Sun, 11 Jul 2004 10:23:16 GMT

Just a stab in the dark - try deleting the user, then re-adding, then readding command to restricted SAM.

Rgds...Geoff

Re: restricted sam

Shaikh Imran — Mon, 12 Jul 2004 01:01:19 GMT

Hi,

Just check if your problem resembles this

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000073730429

Regards,

Re: restricted sam

Eugene Klaus — Tue, 13 Jul 2004 06:44:27 GMT

I haven't had the opportunity to apply patches in hopes of correcting my problem. However, I appreciate the responses and have applied points in anticipation of success.

Thanks Again!