topic Re: ISL Revision A.00.38 OCT 26, 1994 in Operating System - HP-UX

ISL Revision A.00.38 OCT 26, 1994

Donny Jekels — Fri, 13 Aug 2004 06:47:32 GMT

After ignite'ing a A500 from a make_net_recovery image, the box stop at the ISL> prompt.

Booting...
Boot IO Dependent Code (IODC) revision 1

HARD Booted.

ISL Revision A.00.38 OCT 26, 1994

ISL booting hpux

ISL>

I tried entering hpux -is and it returns to the ISL> prmpt without any warnings notices.

Any ideas welcome.

Re: ISL Revision A.00.38 OCT 26, 1994

Michael Tully — Fri, 13 Aug 2004 06:57:06 GMT

Hi Don,

Did the box actually compete the install, or was this the first attempt?

If you were trying to boot off an make_net_recovery image, what was your options?

boot> lan install.xx.xx.xx.xx ?

and you not supposed to use the ISL anyway.

have you tried to boot from the other end (from the igniter server?)

Cheers
Michael

Re: ISL Revision A.00.38 OCT 26, 1994

Donny Jekels — Fri, 13 Aug 2004 07:01:00 GMT

the build went through complete successful.

the very last message is

Booting_From_Client_Disk: Begin

when I log into the GSP is get teh ISL> prompt, I then type hpux -is (for singel user mode) and the ISL> prompt comes right back.

Re: ISL Revision A.00.38 OCT 26, 1994

Pete Randall — Fri, 13 Aug 2004 07:06:58 GMT

Donny,

At the ISL prompt, do "ls" to see if you even have hpux there.

Pete

Re: ISL Revision A.00.38 OCT 26, 1994

Donny Jekels — Fri, 13 Aug 2004 07:07:49 GMT

ISL> ls

Utilities on this system are:

filename type start size created
====================================================
HPUX -12928 832 800 97/11/06 02:10:13

ISL>