topic Re: Don't have local tape drive. Can I create make_recovery tapes across network? in Operating System - HP-UX

Don't have local tape drive. Can I create make_recovery tapes across network?

Jack C. Mahaffey — Mon, 05 Feb 2001 21:22:51 GMT

I'm having concerns about being able to reboot. I don't have an attached tape drive. Can I create make_recovery tapes across the network?
If yes, how can I do it and how would I boot from the network?
Thanks in advance...
jack

Re: Don't have local tape drive. Can I create make_recovery tapes across network?

jherring — Mon, 05 Feb 2001 22:11:55 GMT

make_net_recovery will work great if you want to just store the image on a different system.
see make_net_recovery man page or documentation that can be found at http://www.software.hp.com/products/IUX/
Or you can use make_net_recovery to the system with the tape drive and then copy the data to the tape I believe /opt/ignite/share/doc/makenetrec.txt will describe the procedure. also make_net_recovery man page will help.

There is no way to directly do a make_recovery to a remote tape drive.

Hope this helps

Jon

Re: Don't have local tape drive. Can I create make_recovery tapes across network?

Cheryl Griffin — Tue, 06 Feb 2001 12:59:05 GMT

Furthermore, once you have created the archive using make_net_recovery, you CAN write the archive to tape. It's just a matter of writting the LIF (which makes the tape bootable) and the archive to the tape.

Check out the make_net_recovery paper in /opt/ignite/share/doc/makenetrec.txt.

Since you do not have a tape drive that is local, you could still create the tape. In the event of a failure, and you wanted to restore locally, call your local HP rep. They often have tape drives that are loaned/rented out.