topic Re: compiling new kernel after loading patches in Operating System - HP-UX

compiling new kernel after loading patches

Mike Ingram_1 — Thu, 02 Sep 2004 21:11:04 GMT

Hello,

I have loaded java 1.3 patches on my 11.0 system, and when the kernel was recompliled, I got the message "/usr/ccs/bin/ld: Unsatisfied symbols:
prf_klog_getstring (first referenced in /usr/conf/lib/libhp-ux.a(vm_va
prf_klog_getcount (first referenced in /usr/conf/lib/libhp-ux.a(vm_vas
*** Error exit code 1

Could someone help me and tell me what do I need to do, or load, in order to rectify this problem.

Many thanks.

Re: compiling new kernel after loading patches

Sridhar Bhaskarla — Thu, 02 Sep 2004 22:03:46 GMT

Hi Mike,

I believe it may be missing some patches and it may be hard to figure out the missing patches. I would try to install reasonably latest patch bundles together instead of trying to look for each patch.

For ex., try installing June 2004 HWE and QPK bundles.

Before doing anything, make sure you have a good make_tape_recovery tape.

-Sri

Re: compiling new kernel after loading patches

Mike Ingram_1 — Thu, 02 Sep 2004 22:11:46 GMT

Hi Sri,

I actually got a similar error when I tried that. I'm wondering if it's missing some C libraries or something?

Cheers.

Re: compiling new kernel after loading patches

Sridhar Bhaskarla — Thu, 02 Sep 2004 22:20:52 GMT

Mike,

The kernel libraries under /usr/conf/lib may not be up-to-date which is the reason why I suggested to try with latest patch bundles.

If you have HP contact, then I suggest you open a call with HP.

-Sri

Re: compiling new kernel after loading patches

T G Manikandan — Thu, 02 Sep 2004 22:25:23 GMT

Did this patch ever got re-installed without you noticing it

PHKL_18543

Does any of the java patch did depend on this patch and you re-installed!!

Re: compiling new kernel after loading patches

Mike Ingram_1 — Thu, 02 Sep 2004 22:39:57 GMT

Hi TG,

The options were to retry or abort.
I retried and got the same error, so aborted.
The patch is not displayed on the swlist command, so assume it has not been loaded.
Any idea what patch I could load that contains all the latest C libraries?

Cheers.

Re: compiling new kernel after loading patches

T G Manikandan — Thu, 02 Sep 2004 22:45:14 GMT

The first thing is to check which patch caused the problem with compiling.

Get that patch.Look for their dependencies too.

Can you check this whether the above patch was installed with the java patches.

check the java patch depot as what patches were installed.Can you list them out.

Re: compiling new kernel after loading patches

Patrick Wallek — Thu, 02 Sep 2004 23:20:06 GMT

According to TKB document 3200103041, located here:

http://www2.itrc.hp.com/service/cki/search.do?category=c0&mode=text&searchString=+prf_klog_getcount&search.x=19&search.y=13&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty

You may be able to solve the problem by reinstalling the following patches:

PHKL_22589
PHKL_23183
PHKL_23127
PHKL_24028

The following document may also be a good reference:

SYS ADM: hints to resolve 'unsatisfied symbol's when gen'ing a kernel
TKB Doc ID: 3100586797
http://www2.itrc.hp.com/service/cki/search.do?category=c0&mode=id&searchString=+3100586797&search.x=0&search.y=0&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty