topic Re: want to include "VG01" filesystems to ignite ux image. in Operating System - HP-UX

want to include "VG01" filesystems to ignite ux image.

Ricky_4 — Wed, 08 Sep 2004 06:11:34 GMT

Hi All,

Please assist us of how to include the filesystem that is not part of VG00 in ignite UX image. How about of excluding the other filesystems?

Thanks in advance.

Re: want to include "VG01" filesystems to ignite ux image.

Robert-Jan Goossens — Wed, 08 Sep 2004 06:17:51 GMT

Hi,

Example below.

make_tape_recovery -x inc_entire=vg00 -x inc_entire=vg01 -lv -a /dev/rmt/1mn

Regards,
Robert-Jan

Re: want to include "VG01" filesystems to ignite ux image.

Sยภเl Kย๓คг — Wed, 08 Sep 2004 06:22:46 GMT

make_tape_recovery with -x option will let you include any other volume in to igniteUX backup
regards
SK

Re: want to include "VG01" filesystems to ignite ux image.

Eric Antunes — Wed, 08 Sep 2004 06:24:15 GMT

The easiest way to do this is on a X-Term environment when you can choose all the directories you want to include...

Re: want to include "VG01" filesystems to ignite ux image.

MarkSyder — Wed, 08 Sep 2004 07:34:49 GMT

It can be done, but as stated on another thread earlier today, ignite is designed to allow you to boot a system in an emergency.

Unless the data on vg01 and subsequent vgs doesn't change, I would recommend Data Protector for everyday backups.

Mark Syder (like the drink but spelt different)

Re: want to include "VG01" filesystems to ignite ux image.

Ricky_4 — Thu, 09 Sep 2004 04:56:57 GMT

Hi All,

Thanks for the answers you have provided.

How about if I would like to exclude filesystems from VG01.

Regards,

Bal

Re: want to include "VG01" filesystems to ignite ux image.

MarkSyder — Thu, 09 Sep 2004 05:05:51 GMT

I would recommend using the GUI version.

You can then place the LVs you want to backup in one box and the ones you want to exclude in another.

Mark

Re: want to include "VG01" filesystems to ignite ux image.

Kurt Beyers. — Thu, 09 Sep 2004 05:08:59 GMT

Bal,

If you want to include certain directories of vg01, use the following option:

-x inc_cross=file|dir

Includes the file or directory in the recovery archive and crosses mount points to access any directories that are mounted or files contained in directories that are mounted.

instead of the option -x inc_entire=vg01

best regards,

Kurt

Re: want to include "VG01" filesystems to ignite ux image.

Robert-Jan Goossens — Thu, 09 Sep 2004 06:05:48 GMT

Bal,

you could also use something like this.

make_tape_recovery -x inc_entire=vg00 -x inc_entire=vg01 -x exclude=/apps -c exlude=/apps2 -lv -a /dev/rmt/1mn

Regards,
Robert-Jan