topic SYSLOG ERROR in Operating System - HP-UX

SYSLOG ERROR

Federico_28 — Wed, 24 Nov 2004 04:47:40 GMT

Hallo,
in syslog.log on our server with HP-UX 11.00 I found the following errors:
Nov 24 10:01:21 XXX vmunix: SRA[DPT,c0] (0/2/7/0) reset target 0 lun 0
Nov 24 10:01:26 XXX vmunix: SRA[DPT,c1] (0/2/7/0) READ CHANINFO from 18 timed ou
t, ret=238

I don't understand what does it mean. can somebody help me?

Thank in advance

Re: SYSLOG ERROR

Georg Tresselt — Wed, 24 Nov 2004 04:55:54 GMT

Well, I think it says some SCSI device has reset. Maybe, have a look at the following thread

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=722132

Re: SYSLOG ERROR

Dietmar Konermann — Wed, 24 Nov 2004 05:43:15 GMT

Federico,

since the messages are logged by vmunix without beeing standard HP-UX kernel messages I assume that you have some 3rd party kernel driver installed, maybe some Jukebox thing or similar (indeed look like some SCSI thing)?

Timeouts/Resets in the SCSI context are often caused by Harwdare problems... 1st thing to do would be a check of cabling, termination, etc.

Best regards...
Dietmar.