topic Re: XDMCP Broadcast problems in Operating System - HP-UX

XDMCP Broadcast problems

Paul Clayton — Sat, 11 Dec 2004 06:25:54 GMT

Here is one for the X gurus. We recently moved all our servers onto another subnet, since then XDMCP (hummingbird Exceed) broadcast does not pick up any servers. As we have all flavours it is occurring on each unit.

Help Please

Re: XDMCP Broadcast problems

Robert-Jan Goossens — Sat, 11 Dec 2004 06:43:32 GMT

Hi Paul,

Check the file below for ip addresses.

/etc/dt/config/Xaccess
/usr/dt/config/Xaccess

more info.

US
http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000063236640

Europe
http://www5.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000063236640

Regards,
Robert-Jan

Re: XDMCP Broadcast problems

Victor Fridyev — Sat, 11 Dec 2004 14:17:55 GMT

Hi,

If your servers there are on another subnet than a PC with Exceed , you can use XDMCP Broadcast only with the "HOST LIST" option. This mode is not very stable, so I'd recommend you to use "XDMCP QUERY" mode.
The pure XDMCP Broadcast works only for computers in the same subnet.

HTH

Re: XDMCP Broadcast problems

Sridhar Bhaskarla — Sun, 12 Dec 2004 00:39:22 GMT

Hi Paul,

You don't need to use XDMCP broadcast unless you like to chose between various servers.

As mentioned by Paul, Use XDMCP query or XDMCP indirect option and configure the specific host to connect to.

-Sri

Re: XDMCP Broadcast problems

Paul Clayton — Mon, 13 Dec 2004 01:38:16 GMT

Guys,

Thanx, it was as I suspected from your responses. I have used the xdmcp.txt list to get the hosts up. Thanx for the responses.