topic auto_parms.log Error in Operating System - HP-UX

auto_parms.log Error

Donald W. Healey — Mon, 13 Dec 2004 12:00:38 GMT

On boot, we are logging the following in out /etc/auto_parms.log

Dec 11 01:35:14: Information: /sbin/auto_parms execution was stopped.
Dec 11 01:35:14: /sbin/auto_parms may only execute from /sbin/rc during
Dec 11 01:35:14: the initial transition from run level 'S' ( see init(1M) ).

This box isn't using DHCP, i.e.
/etc/rc.config.d/netconf contains the setting
DHCP_ENABLE[0]=0

Can you tell us what might be causing the error?

Re: auto_parms.log Error

Deoncia Grayson_1 — Mon, 13 Dec 2004 12:16:39 GMT

Take a look at this post, this may help:
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=218526

Re: auto_parms.log Error

Scot Bean — Mon, 13 Dec 2004 15:28:15 GMT

These msgs in the /etc/auto_parms.log unfortunately don't tell us much.

What version of HPUX are you running? Has the machine been
- recently installed or patched
- doing this just lately, or always
- spitting out any other errors to the console at boot time?