topic Re: inetd -c in Operating System - HP-UX

inetd -c

Chang_6 — Mon, 13 Dec 2004 15:36:12 GMT

Hi,

I made changes to inetd.sec and inetd.conf to disable telnet and ftp. Should I just issue inetd -c? I think it has no effect on existing connections. Is inetd -c sufficient? Please clarify.

Re: inetd -c

Stf — Mon, 13 Dec 2004 15:38:29 GMT

Hello,

yes innet -c will restart inet services without any interruption of network!!!

Stf ;-)

Re: inetd -c

A. Clay Stephenson — Mon, 13 Dec 2004 15:39:23 GMT

Yes, inetd -c has the effect of sending a SIGHUP to the inetd process. You can do the same thing with "kill -1 inetd_PID" and that is the way it is done on most UNIX flavors. Inetd -c saves you the trouble of determining the process id of inetd. If will not affect existing sessions.

Re: inetd -c

Deoncia Grayson_1 — Mon, 13 Dec 2004 15:41:44 GMT

inetd -c reconfigures the internet daemon, by forcing inetd to reread the inetd.conf file. There should be no interruptions and it should work with no problems.

Re: inetd -c

Sean OB_1 — Mon, 13 Dec 2004 17:05:01 GMT

inetd -c will force inet to reread the configuration file and will have no affect on current connections to the box.

Re: inetd -c

Chang_6 — Mon, 13 Dec 2004 17:16:37 GMT

Hi,

On a UNIX System V Release 4.0 Version 3.0

inetd -c won't work. I looked at the man page there is no -c option. I modified inetd.conf and inetd.sec to disable ftp &telnet. telnet is disabled but ftp is sitll working. How can I disable ftp permanently?

Re: inetd -c

Patrick Wallek — Mon, 13 Dec 2004 17:26:16 GMT

If you remove or comment out the entries for FTP from the /etc/inetd.conf file then FTP will be disabled.

What release of HP-UX are you trying this on? I *KNOW* that this works on HP-UX 10.20 and higher and it is in the inetd man page. If you are using something different, then there is no guarantee it will work.

If you're not running HP-UX keep in mind that these answers may not work.

Since you don't specify a specific OS, it will be assumed that you are on HP-UX since this is an HP-UX forum.

Re: inetd -c

A. Clay Stephenson — Mon, 13 Dec 2004 17:31:01 GMT

The "-c" option is an HP-UX "improvement". As I mentioned earlier, it just saves you a bit of work.

Do this:
ps -ef | grep inetd and note the PID of the inetd process.

kill -1 inetd_PID

That's exactly the same thing that an inetd -c does; inetd has a signal handler for SIGHUP (kill -1) so that when it receives this signal, it rereads the configuration file and then reconfigures itself without disturbing existing connections.

Re: inetd -c

Deoncia Grayson_1 — Mon, 13 Dec 2004 18:00:41 GMT

I believe you're running Tru64 and if this is true then you're right the -c option will not work to reconfigure the inetd.conf file.
To disable ftp inside the inetd.conf file then you need to do the following

#ftp stream tcp nowait root /usr/sbin/ftpd ftpd

Read this link for more info:

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V50_HTML/MAN/MAN4/0147____.HTM

Re: inetd -c

Michael Schulte zur Sur — Mon, 13 Dec 2004 19:13:03 GMT

Hi,

in case you run tru64 5.x then it wil be inetd -h

greetings,

Michael

Re: inetd -c

Hoang Chi Cong_1 — Mon, 13 Dec 2004 21:17:33 GMT

Hi Chang M

You can refer to the manual for more detail the inetd.
As above idea, you can disable telnet and ftp service.
But if you only rem the telnet and ftp in the inetd.sec and inetd.conf. You still can use rlogin service! You can test with CRT software.
I think the best way is: do not disable these services.
You can set the range of IP address which can access your system with these services by adding this line in the inetd.sec file:

telnet allow
ftp allow

Note that: *ONLY* the IP address was specify on that line *CAN* connect to your system with telnet and ftp services.

In additional, you can also change and disable these services on /etc/services

I have never worked with Tru64 but my idea just for HP-UX .

All the best
Regard,
Jimkery