topic syslog message... in Operating System - HP-UX

syslog message...

KO kwang tae — Fri, 17 Dec 2004 03:45:41 GMT

help me!

there are the following messages in syslog.log files

Dec 17 15:49:13 krcship vmunix: SCSI: bp: 0000000040abec00
Dec 17 15:49:13 krcship vmunix: dev: bc022000
Dec 17 15:49:13 krcship vmunix: cdb: 12 00 00 00 80 00
Dec 17 15:49:13 krcship vmunix: retry_cnt: 5
Dec 17 15:49:13 krcship vmunix: residual: 80
Dec 17 15:49:13 krcship vmunix: status: (28) Queue Full

i don't know what kind of queue....

Does anybody know?

thanks in advance~

Re: syslog message...

Robert-Jan Goossens — Fri, 17 Dec 2004 03:58:55 GMT

Hi,

Check this patch.

http://www4.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHKL_30510

watch out for the depending patches.

Best regards,
Robert-Jan

Re: syslog message...

KO kwang tae — Sun, 26 Dec 2004 19:53:47 GMT

the patch you said is already installed

and applied.

Is not there another problem i can think?

help~

thanks in advance

Re: syslog message...

Nguyen Anh Tien — Sun, 26 Dec 2004 21:23:32 GMT

have you checkes "scsi_max_qdepth " parameter in kernel.
refer this link for more description of this parameter
http://docs.hp.com/en/B2355-60105/scsi_max_qdepth.5.html
Regard
tienna

Re: syslog message...

Mohanasundaram_1 — Sun, 26 Dec 2004 23:37:19 GMT

Hi,

This message is produced by the sctl driver, Major No.203 (Hex value bc).

The PHKL_30150 patch has a fix for a similar problem.
--------------------------------------------
( SR:8606178152 CR:JAGad47379 )
Process hang can result during a device open. The system log (/var/adm/syslog/syslog.log) shows Queue Full status
and a large retry count on an Inquiry request.
--------------------------------------------

If this patch is already present in your system, check if it is in configured state and check if all the dependent patches are in place as well.

You can also try reseating this SCSI controller card, as a last measure, and check if it helps.

With Regards,
Mohan.