topic Re: Install 11i Version2 in Operating System - HP-UX

Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 11:24:34 GMT

I am testing an update of a system from 11i ver 1 to 11i version2. I keep getting the following error:

[ltchp7:/cdrom]# swinstall -s /cdrom HPUX11i-OE

======= 12/21/04 11:23:22 EST BEGIN swinstall SESSION
(non-interactive) (jobid=ltchp7-0065)

* Session started for user "root@ltchp7".

* Beginning Selection
* Target connection succeeded for "ltchp7:/".
* "ltchp7:/cdrom": Cannot open the logfile on this target or
source. Possibly the media is read-only or there is a
permission problem. Check the daemon logfile and
"/var/tmp/swagent.log" on this host for more information.
ERROR: Could not apply the software selection "HPUX11i-OE" because
it refers to a bundle or to a product, subproduct or fileset
within a bundle but no compatible bundles meeting the
specification were found.
* Software selection failed for "ltchp7:/cdrom".
ERROR: No software has been selected.
ERROR: Cannot continue the "swinstall" task.
* Selection had errors.

======= 12/21/04 11:23:34 EST END swinstall SESSION (non-interactive)
(jobid=ltchp7-0065)

Also, when I look into the /cdrom/HPUX11i-OE directory on the cdrom, it is empty. Not sure whats going on. Any help is appreciated.

Re: Install 11i Version2

Patrick Wallek — Tue, 21 Dec 2004 11:29:14 GMT

What model system is this? Is it 32-bit or 64-bit?

As far as I know 11iv2 is 64-bit only. I don't think there's a 32-bit version available.

Re: Install 11i Version2

Steven E. Protter — Tue, 21 Dec 2004 12:12:12 GMT

My understanding is that 32 bit systems can not be upgraded to HP-UX 11i v2.

I don't know HP's long term plans, but I poked around on the release DVD-ROM and found no evidence of anything that was 32 bit.

SEP

Re: Install 11i Version2

Pete Randall — Tue, 21 Dec 2004 12:17:01 GMT

Robert,

I believe you've probably already seen this, and you're aware that it's exclusively 64 bit, and it's exclusively certain hardware, but as far as requirements to install v2, here's the list:

http://h18000.www1.hp.com/products/quickspecs/12079_div/12079_div.HTML#Overview

Assuming that you've satisfied all the above, I would dare to say that a call to HP might be in order.

Pete

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 12:44:09 GMT

[ltchp7:/cdrom]# model
9000/899/K570
[ltchp7:/cdrom]# getconf KERNEL_BITS
64

Re: Install 11i Version2

Steven E. Protter — Tue, 21 Dec 2004 12:50:05 GMT

Okay.

K570

Not supported but install should be possible.

Have to have enough memroy, and I'd like to see the log file referred to by the error you have posted.

Also the release I got was on DVD-ROM. Is the CD drive in the K570 a DVD-ROM?

SEP

Re: Install 11i Version2

Scot Bean — Tue, 21 Dec 2004 12:50:18 GMT

Pete's link had the answer:

"
Supported HP 9000 Server Models
Superdome/PA (incl. 128w SMP)
rp8400 & rp7400 series
rp5400 & rp4400 series
rp3440 & rp2400 series
64-bit A-class servers, L-class, N-class
Up to 1TB memory for Superdome
Supported backplanes: PCI or newer, e.g., PCI-X
"

K class is not supported.

Re: Install 11i Version2

Patrick Wallek — Tue, 21 Dec 2004 12:52:55 GMT

Just an FYI -- Just because it is not "OFFICIALLY SUPPORTED" does not mean it won't work. I have 11iv2 for PA-RISC installed and running on a C3000 workstation and NO workstations are officially supported.

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 12:55:08 GMT

Yes DVD ROM, I had to install it from another machine.

I figured I could still install ver 2 eventhough it is not supported.

Re: Install 11i Version2

Pete Randall — Tue, 21 Dec 2004 12:56:52 GMT

Steve makes an excellent point about the DVD vs CD issue. My old K570 certainly didn't have a DVD drive.

Pete

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 12:58:40 GMT

Do I need a license key.
When I run swinstall in interactive mode, I only see a few products to install.

If I do a 'ls -l /cdrom' I see all kinds of products.

Is this a licensing issue?

Re: Install 11i Version2

Scot Bean — Tue, 21 Dec 2004 13:19:07 GMT

When you said you were testing an 'update', did you mean you were trying a simple 'swinstall' command or the 'update-ux' command?

If you are just trying swinstall, you will see nothing. 11i1 is 11.11. 11i2 is 11.23. swinstall cmd will recognize nothing to install between these 2 releases.

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 13:39:03 GMT

I ran,

swinstall -s /cdrom HPUX11i-OE

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 13:41:57 GMT

Why when I look into the cdrom files, I see nothing unde the OS packages?

But under other products I see files?

[ltchp7:/cdrom]# cd HPUXBaseOS
[ltchp7:/cdrom/HPUXBaseOS]# ll
ctotal 0
[ltchp7:/cdrom/HPUXBaseOS]# cd ..
[ltchp7:/cdrom]# cd HPUXBaseOS
[ltchp7:/cdrom/HPUXBaseOS]# ll
total 0
[ltchp7:/cdrom/HPUXBaseOS]# cd ..
[ltchp7:/cdrom]# cd HPUXBaseAux
[ltchp7:/cdrom/HPUXBaseAux]# ll
total 0
[ltchp7:/cdrom/HPUXBaseAux]# cd ..
[ltchp7:/cdrom]# cd HPUX11i-OE
[ltchp7:/cdrom/HPUX11i-OE]# ll
total 0
[ltchp7:/cdrom/HPUX11i-OE]# cd ..
[ltchp7:/cdrom]# cd ISEE
[ltchp7:/cdrom/ISEE]# ll
total 4
dr-xr-xr-x 1 4294967295 4294967295 2048 Sep 7 15:03 CORE

Re: Install 11i Version2

Steven E. Protter — Tue, 21 Dec 2004 13:45:57 GMT

To pile on, if you stick a DVD a CD-ROM and mount it, it will mount but you won't see anything on it.

Sounds like the issue, except the isntall should never start, which it may be in this situation.

Anyone want to try this to verify. HP swapped out my last ROM drive for DVD 10 days ago.

SEP

Re: Install 11i Version2

Pete Randall — Tue, 21 Dec 2004 14:01:43 GMT

Robert,

I'm confused. Are you upgrading or installing? I've never heard of, or contemplated trying, running swinstall from the command line to install the Operating System. Not having run an upgrade since way back in the 10.0 days, I can't say anything about how that is normally done, but I have to wonder if the reason you're not seeing any filesets is because of the environment in which you're running.

Can you try a cold install - booting from the CD?

Pete

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 14:09:07 GMT

Yes, it will boot from the CD.

I want to do an update, not a cold install like I normally do.

Do I use the udpate-ux command to initiate the upgrade from CD or the swinstall command?

Re: Install 11i Version2

Patrick Wallek — Tue, 21 Dec 2004 14:11:25 GMT

OK, just swinstalling 11iv2 ain't gonna work. If you are trying to upgrade you MUST use the update-ux command.

Have a read through Chapter 6 of the "Installation and Update Guide HP-UX 11i Version 2". It details how to do what you want to do.

It would probably be better if you read through the whole manual as it describes steps you MUST take to make your system ready to update to 11iv2.

The manual is available here:

HTML format: http://docs.hp.com/en/5990-8144/index.html

PDF format: http://docs.hp.com/en/5990-8144/5990-8144.pdf

You should have much better luck following the instructions in this manual.

Re: Install 11i Version2

Nobody's Hero — Tue, 21 Dec 2004 14:12:30 GMT

Ok I got it.

Hardware is not valid for an install.

[ltchp7:/cdrom]# update-ux -s /cdrom HPUX11i-OE

======= Tue Dec 21 14:11:07 EST 2004 BEGIN update-ux

NOTE: Progress of the software installation can be monitored more closely
by opening another window and entering the command:
'tail -f /var/adm/sw/swagent.log'
NOTE: All output that scrolls by on the screen is logged to
'/var/adm/sw/update-ux.log'
* Obtaining some information from the source depot.
ERROR: Updating to 11.23 is not supported on this hardwar e.
NOTE: One or more errors encountered. Take appropriate corrective action
and re-run update-ux to complete the update.

======= Tue Dec 21 14:11:27 EST 2004 END update-ux

Re: Install 11i Version2

Patrick Wallek — Tue, 21 Dec 2004 14:26:21 GMT

You should be able to do a cold install to that hardware though. As I said above, I installed 11iv2 on a C3000, which definitely is not officially supported.