topic HP 3700DN configuration on HP-UX in Operating System - HP-UX

HP 3700DN configuration on HP-UX

geir_2 — Mon, 10 Jan 2005 09:00:17 GMT

I need some information how to configure HP Colorjet 3700DN as a network printer on HP-UX 10.20.

I tried to get some information on Internet without success. I know that it's possible to do with a utility called SAM and manually.

If someone could tell me or give me some information on both of the method it would be great.
Thanks!

Re: HP 3700DN configuration on HP-UX

Pete Randall — Mon, 10 Jan 2005 09:04:55 GMT

Manually: addqueue -h $IP -q $PRNTR -b off
(where $IP is the ip address of the printer and $PRNTR is the name of the printer).

Via SAM: select Printers and Plotters; select LP Spooler; select Printers and Plotters; click on Actions and select Add Network Based Printer/Plotter; fill in the blanks.

Pete

Re: HP 3700DN configuration on HP-UX

geir_2 — Mon, 10 Jan 2005 09:15:59 GMT

Hi,
thanks for fast and great answer
:-)

But I still get an error message:
"The HP JetDirect printer software is not installed on your system (neither the command
"/usr/lib/admin/jetadmin" not the command "/usr/lib/hpnp/admin/hpnpcfg" exist""

Where can I get the software?

Thanks!

Rgds geir

Re: HP 3700DN configuration on HP-UX

Pete Randall — Mon, 10 Jan 2005 09:20:36 GMT

Check this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=483251

Pete

Re: HP 3700DN configuration on HP-UX

geir_2 — Mon, 10 Jan 2005 09:56:29 GMT

Pete,

Thanks again!

Last question:
My computer can't find addqueue. Is it a part of standard software, or must I install some extra software to execute the command?

regards geir

Re: HP 3700DN configuration on HP-UX

Pete Randall — Mon, 10 Jan 2005 10:04:57 GMT

The addqueue command is part of HP Printer Installer (HPPI). Once you download and install HPPI, you should have the addqueue command.

Pete

Re: HP 3700DN configuration on HP-UX

geir_2 — Tue, 11 Jan 2005 02:11:45 GMT

Thanks
I'm sorry for all the questions, but

1) Is it not possible to install a network printer without these software package?

2) If the answer is yes, is it then possible to install these software package to a usb memory with use of windows 2000, and then transport it to a HP-UX system.

The HP-UX system is not connected to Internet. That's the reason for all odd questions.

regards geir

Re: HP 3700DN configuration on HP-UX

AISSAOUI Nourreddine — Tue, 11 Jan 2005 09:18:22 GMT

Hello Geir,

If you want to configure your HP LJ C3700DN printer to use all of it's capabilities, HPPI is the best solution.

To download :

http://www.hp.com/go/hppi_sw

you can of course do the download from your Windows box and then use an ftp transfer (binary mode) to the HP-UX server.

The other alternative is to configure your printer as a remote printer using SAM but this is a limited mode with only few options.

Nourreddine

Re: HP 3700DN configuration on HP-UX

geir_2 — Wed, 12 Jan 2005 03:11:25 GMT

Hello,

Thanks for the answer. It help me to solve
the proplems.
:-)

regards geir