topic mk_kernel fails with in Operating System - HP-UX

mk_kernel fails with

Lars Olsson — Mon, 07 Feb 2005 02:24:23 GMT

When trying to create a new kernel (hpux 11.11) using the mk_kernel command, I get the following error message:

ld: Unsatisfied protected
symbol "dumpdev_path_change" in file "mod_wk.d/hsx/smo
d.o"
1 errors.
*** Error exit code 1

Stop.
config: make did an exit(1)

Does anyone know how to fix this problem?
Thanks in advance for any help.

Re: mk_kernel fails with

Steve Steel — Mon, 07 Feb 2005 03:59:32 GMT

Hi

Guess you are installing secure path .

Then you have missed patches which are needed - recheck the documants

To enable dump support on EVA devices with path failover,
the following software updates must be installed: PHKL_30219
and PHKL_30218. These two software updates can be installed
in any order. If either software update is not installed,
this new feature is not enabled in your system.

30219 installed this symbol

numbers are now

30219 and 30607

Steve Steel

Re: mk_kernel fails with

John Payne_2 — Mon, 07 Feb 2005 04:27:16 GMT

And if you talk to the Secure Path people, they will most likely say to install the latest GOLDBASE, GOLDAPPS, and HWEnable11i bundles. (It would be nice if they would say which patches exactly were needed from HWEnable, I went the rounds with them once, but to no avail.) If this is SecurePath, what version are you trying to install, and what version of HWEEnable11i is installed on your system?

John

Re: mk_kernel fails with

Lars Olsson — Mon, 07 Feb 2005 04:52:08 GMT

Steve, and John, Thanks a lot for the info regarding whcih patches were needed. I just downloaded, and installed, them. All seems to work fine now.

Cheers.