topic Re: Remote printing to an IP address in Operating System - HP-UX

Remote printing to an IP address

Tim O'Connell — Thu, 17 Feb 2005 05:37:20 GMT

On my previous server running Unixware 2.1.3, there was a simple way to print to a printer in another site. The procedure was:
Put entry in hosts file - "99.99.999.99 lp20"
Specify remote lp - "lpsystem -t bsd lp20"
Specify unix queue - "lpadmin -p lp20 -s lp20"
accept & enable lp20
I could then do "lp -d lp20 filename".

Is there a similar way to do it on HPUX11. Lpsystem doesn't seem to exist.

Thanks,

Tim

Re: Remote printing to an IP address

V. Nyga — Thu, 17 Feb 2005 06:25:58 GMT

Hi,

you an do it through SAM.

If you prefer ux commands, then I think a search in this forum will show many threads with this commands.

HTH
Volkmar

Re: Remote printing to an IP address

Pete Randall — Thu, 17 Feb 2005 07:00:30 GMT

Hi Tim,

There's basically two ways to do his in HP-UX: through lp or through the hppi interface. In lp, you would add this with the lpadmin command like this:
lpadmin -p$PRNTR -orm$LOC -orp$PRNTR -mrmodel -v/dev/null -ob3 -ocmrcmodel -osmrsmodel"

where $PRNTR is the queue name for the printer and $LOC is the fully qualified domain name of the host on which the printer resides.

To use the hppi interface (HP Printer Installer), you first need to download the hppi program from here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=18922&taskId=135&prodTypeId=18972&prodSeriesId=27349〈=en&cc=us

After installing, you then add the printer like this:
addqueue -h $IP -q $PRNTR -b off

where $IP is the ip address and $PRNTR is the name of the queue and the "-b off" is to try to ensure that we don't get any damn banner pages!

Pete

Re: Remote printing to an IP address

Tim O'Connell — Thu, 17 Feb 2005 12:26:21 GMT

Thanks for the replies. Got it working thru' sam with an entry in /etc/hosts.

Many thanks,

Tim