https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505612#M21489 Hello Nyree,<BR /><BR />looks like defective or missconfigured targetmodem.<BR />Could it be, that the called number demands a callback, that you do not accept ?<BR /><BR />Do not know if this helps<BR />Volker<BR /> Thu, 15 Mar 2001 18:28:46 GMT Volker Borowski 2001-03-15T18:28:46Z https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505611#M21488 When I run x25check I get the error:<BR />Unable to Connect to Remote Node<BR />VC_CLEAR Packet was received with<BR />CAUSE 0: DTE Originated<BR /><BR />Can anybody tell me what could be causing the problem?<BR /><BR />Regards<BR />Nyree Johns Thu, 15 Mar 2001 15:36:26 GMT https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505611#M21488 Nyree Johns 2001-03-15T15:36:26Z https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505612#M21489 Hello Nyree,<BR /><BR />looks like defective or missconfigured targetmodem.<BR />Could it be, that the called number demands a callback, that you do not accept ?<BR /><BR />Do not know if this helps<BR />Volker<BR /> Thu, 15 Mar 2001 18:28:46 GMT https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505612#M21489 Volker Borowski 2001-03-15T18:28:46Z https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505613#M21490 Victor,<BR /><BR />Thanks for you reply - sorry for the delay! The problem turned out to be at the remote end. The X25 link was from an HP9000 to a mobile switch (MSC), and the X25 i/f on the switch hadn't been fully enabled. Tue, 18 Sep 2001 07:47:54 GMT https://community.hpe.com/t5/operating-system-hp-ux/x25-error/m-p/2505613#M21490 Nyree Johns 2001-09-18T07:47:54Z