topic Re: printer in Operating System - HP-UX

printer

Fadia Almarei — Sun, 06 Mar 2005 07:36:20 GMT

Dear All
i have installed the jetdirect software on my HP-UX 11.11 server , in my company i have more than one network printer, i try to add some printers using this software put it rejects the configuration ,what should i do.

Re: printer

Alex Lavrov. — Sun, 06 Mar 2005 07:57:30 GMT

What are the error messages you get?

Re: printer

Fadia Almarei — Sun, 06 Mar 2005 08:03:39 GMT

i open it from sam->printer and plotter->LP spooler->printer and plotter, and from actions i select add network based printer, and from the jectdirect menu i select {1} spooler administration,then select {1}add printer to local spooler,put a certain IP adress from my network printers,and then it give me the following error
"
!! No response from 172.16.4.32 !!
... (trying to ping 172.16.4.32)

The HP JetDirect Printer Installer for Unix can ping the device.
The problem may be:
* incorrect GET community name!
* it is not a network printer!
* other.

Do you want to continue (y/n/q, default - n)?
"

Re: printer

Alex Lavrov. — Sun, 06 Mar 2005 08:49:07 GMT

According to the errors you got, either SNMP configuration of the printer is wrong or you just don't have a ping to it.

Did you configure ip for the printer?

Re: printer

Fadia Almarei — Sun, 06 Mar 2005 08:50:55 GMT

yes i put the ip adress of the printer example 172.16.4.32

Re: printer

Alex Lavrov. — Sun, 06 Mar 2005 08:56:39 GMT

And you can ping it from your server?

Re: printer

John Jimenez — Mon, 07 Mar 2005 11:50:13 GMT

If you are running jet direct, you can only view in sam. You need to install using the hppi command and use the jet direct utility

Re: printer

John Jimenez — Mon, 07 Mar 2005 11:53:52 GMT

/opt/hpnpl/admin/hppi

Re: printer

Bill Hassell — Mon, 07 Mar 2005 23:24:39 GMT

Is the printer an HP Laserjet printer or some other manufacturer? If it is not an HP printer with an HP JetDirect LAN card, it is not a "network printer" as defined by SAM. SAM runs the JetDirect printer installer and this program only works on HP's JetDirect family of LAN cards. Any other manufacturer must be added as a "remote printer". To do this, you need 3 names: the local printer queue name (you pick), the remote printer's LAN card IPaddress, and the LAN card's internal printer name. This cannot be guessed--you'll have to get it from the manufacturer. Add the printer using the BSD option in SAM.

Re: printer

Mobeen_1 — Tue, 08 Mar 2005 05:08:22 GMT

Hello Fadia,
Could you please make sure that you are able to ping the printer from the server you are trying to configure it on ?

regards
Mobeen

Re: printer

Fadia Almarei — Tue, 08 Mar 2005 06:14:51 GMT

hi moben
yes i bing it and it is work