topic Re: Cleanup After Patching in Operating System - HP-UX

Cleanup After Patching

Steven Chen_1 — Mon, 04 Apr 2005 10:11:30 GMT

I would like to know if patches are installed on /var/adm/sw/save so that I can safely remove those depot files on location such as /var/patch/depot.

Comments are appreciated.

Steven

Re: Cleanup After Patching

Robert-Jan Goossens — Mon, 04 Apr 2005 10:14:48 GMT

Hi Steven,

There is a cleanup utility on HPUX.

# cleanup -p -c 2
-p preview
-c x Commit patches superseded at least X times.

Check the man page for more information.

Hope this helps,
Robert-Jan

Re: Cleanup After Patching

A. Clay Stephenson — Mon, 04 Apr 2005 10:15:25 GMT

By far, the easist method is to simply run the "cleanup" command. It will do all of this for you and safely.

For example, cleanup -c 1 will remove all the old patches that have been superceded at least 1 time. Man cleanup for details.

PS. If this is an early version of HP-UX 11.0, the cleanup command was accidently omitted. You may need to install a patch to get the comand.

Re: Cleanup After Patching

Steven Chen_1 — Mon, 04 Apr 2005 10:27:36 GMT

Thanks for the quick help.

By the way, I don't need to rm /var/adm/sw/save files yet, as I have enough space.

What I need is just the depot files removed on /var/patch/depot (I swcopy patches there first before swinstall). Would that be save?

Any comments?

Re: Cleanup After Patching

Steven Chen_1 — Mon, 04 Apr 2005 10:27:45 GMT

Re: Cleanup After Patching

Pete Randall — Mon, 04 Apr 2005 10:28:36 GMT

Steven,

Yes, that's safe - run "swremove -d" to get rid of them.

Pete

Re: Cleanup After Patching

A. Clay Stephenson — Mon, 04 Apr 2005 10:35:41 GMT

You should unregister the depot first using swreg -u. Man swreg for details or you can use swremove to remove your temporary depot OR you can use SAM -> Software Management -> Remove Depot Software.

Re: Cleanup After Patching

Steven Chen_1 — Mon, 04 Apr 2005 10:43:34 GMT

Clay,

Last question: after swreg, can I use "rm" instead of using sam to swremove?

Thanks alot.

Re: Cleanup After Patching

A. Clay Stephenson — Mon, 04 Apr 2005 10:50:43 GMT

Yes, although swremove will do all the operations for you but you can do a swreg -u xxxxx and then a rm -r yyyyy. That's up to you.

A good technique is to use SAM this first time and then examine the SAM logs. You will see the steps in the correct order.

Re: Cleanup After Patching

Steven Chen_1 — Mon, 04 Apr 2005 10:56:37 GMT

Every guys, thanks for the help!

I have never seen any tech forum that is filled up with so many serious & knowledgable folks!