topic Re: VxVM savecrash in Operating System - HP-UX

VxVM savecrash

MikeL_4 — Wed, 04 May 2005 11:02:07 GMT

Our system crashed and rebooted and I am trying to get the crash dumped to /var/adm/crash with the savecrash command but am not having success.
The output of my crashconf is:
# crashconf -v
Crash dump configuration has been changed since boot.

CLASS PAGES INCLUDED IN DUMP DESCRIPTION
-------- ---------- ---------------- -------------------------------------
UNUSED 14044 no, by default unused pages
USERPG 1272491 no, by default user process pages
BCACHE 417881 no, by default buffer cache pages
KCODE 2635 no, by default kernel code pages
USTACK 5043 yes, by default user process stacks
FSDATA 730 yes, by default file system metadata
KDDATA 283022 yes, by default kernel dynamic data
KSDATA 97210 yes, by default kernel static data

Total pages on system: 2093056
Total pages included in dump: 386005

DEVICE OFFSET(kB) SIZE (kB) LOGICAL VOL. NAME
------------ ---------- ---------- ------------ -------------------------
31:0x066000 314464 8388608 2:0x000001 /dev/vx/dsk/rootdg/swapvol1
31:0x006000 314464 4194304 2:0x000006 /dev/vx/dsk/rootdg/swapvol
----------
12582912

How do I setup the savecrash command to get my dump output ???

Re: VxVM savecrash

RAC_1 — Wed, 04 May 2005 11:28:40 GMT

Make sure that you have enough space in /var/adm/crash directory

savecrash -rv

Does it save it??

Re: VxVM savecrash

MikeL_4 — Wed, 04 May 2005 11:52:43 GMT

# savecrash -rv
savecrash: No dump header
#

Re: VxVM savecrash

Florian Heigl (new acc) — Wed, 04 May 2005 12:01:06 GMT

please check /etc/rc.log's swapon messages (defered activation??) and swapinfo - the 'no dump header' message sounds like the swap got activated already -> dump is gone.

Re: VxVM savecrash

RAC_1 — Wed, 04 May 2005 12:02:41 GMT

Are you sure system crashed and dumped the crash dump?? Is savecrash set 1?? (in /etc/rc.config.d/savecrash file)

What does /etc/shutdownlog say??

Re: VxVM savecrash

MikeL_4 — Wed, 04 May 2005 12:05:59 GMT

I guess we lost the dump then, in checking /etc/rc.config.d/savecrash had the SAVECRASH & SAVECRASH_DIR commented out, so on the reboot it didn't save the file first and went on to start swap.....

Re: VxVM savecrash

MikeL_4 — Wed, 04 May 2005 12:12:32 GMT

Found in /etc/rc.log

Save system crash dump if needed
Output from "/sbin/rc1.d/S440savecrash start":
----------------------------
savecrash directory not set; defaulting to: /var/adm/crash
EXIT CODE: 2 - savecrash found no core dump to save
"/sbin/rc1.d/S440savecrash start" SKIPPED

Re: VxVM savecrash

MikeL_4 — Wed, 04 May 2005 12:17:11 GMT

What I don't understand then is the console said it was dumping so why does rc.log say there is no dump....

*** Dumping: 97% complete (1512 of 1544 MB) (device rootdg/swapvol)
*** Dumping: 98% complete (1520 of 1544 MB) (device rootdg/swapvol)
*** Dumping: 98% complete (1528 of 1544 MB) (device rootdg/swapvol)
*** Dumping: 99% complete (1536 of 1544 MB) (device rootdg/swapvol)
*** Dumping: 100% complete (1544 of 1544 MB) (device rootdg/swapvol)
*** Dumping: 100% complete (1544 of 1544 MB).
*** System rebooting.