topic Re: getexecname () failed.... in Operating System - HP-UX

getexecname () failed....

Richard_115 — Tue, 24 May 2005 14:22:30 GMT

Anyone out there with SUN systems running Solaris 9 ? Recently i built a system, created the mirrors are required. Now the system has been OK till yesterday after the DBA started installing oracle 9.20. Currently when I type commands like #uptime or #w or #ps
I get the message getexecname() failed. Has anyone ever got this message and probable reasons and / or solutions to this ? Please advise......
Thanks
Richard.

Re: getexecname () failed....

A. Clay Stephenson — Tue, 24 May 2005 14:41:45 GMT

I seen that happen on Sun boxes when the /proc filesystem is not mounted. See if it's mounted.

From memory: "mount -F proc /proc"; you might also have a bad entry in vfstab.

Re: getexecname () failed....

Alex Lavrov. — Tue, 24 May 2005 14:55:09 GMT

Do you have "/proc"?

If not, try to create it:
mkdir /proc
mount -F proc /proc

Alex.

Re: getexecname () failed....

Richard_115 — Tue, 24 May 2005 14:58:36 GMT

Hi All the HP people;
Thank GOD we have HP forum! This has worked. Imagine I called Sun support since yesterday and no answer as yet !

I will rate all that have replied and all the HP forum 100% support.

Re: getexecname () failed....

Richard_115 — Tue, 24 May 2005 14:59:32 GMT

Thanks It worked. Cudos to all. rating 100% correct.

Re: getexecname () failed....

Richard_115 — Tue, 24 May 2005 15:00:23 GMT

Thanks a million. I should give u and all HP forum pple 100% rating. It worked.