Swcopy Fiber Channel depot files

Kenny_16 — Thu, 26 May 2005 19:54:58 GMT

I am trying to swcopy five Fiber Channel driver depot files into one since each needs a reboot. But it fails with the following error message:
===============================================
PHKL_28569.CORE2-KRN,fa=HP-UX_B.11.11_64
* The software
"FC-FCD.FC-FCD-KRN,r=B.11.11.03,a=HP-UX_B.11.11_64,v=HP" was
successfully marked, but it depends on the following software
items which could not be found in the source. However, these
items may already be in the target. This will be checked
during the Analysis Phase:
FC-TACHYON-TL.FC-TL-KRN,r>=B.11.11.09
PHKL_28569.CORE2-KRN,fa=HP-UX_B.11.11_64
* Source:
/var/news/fiber/FibrChanl-01_B111103.depot
* Targets: kcdmuxp1:/tmp/fiber.depot
* Software selections:
FibrChanl-01,r=B.11.11.03,a=HP-UX_B.11.11_64,v=HP
FC-FCD.FC-FCD-KRN,r=B.11.11.03,a=HP-UX_B.11.11_64,v=HP,fr=B.11.11.03,fa=HP-UX_B.11.11_64
FC-FCD.FC-FCD-RUN,r=B.11.11.03,a=HP-UX_B.11.11_64,v=HP,fr=B.11.11.03,fa=HP-UX_B.11.11_64
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swcopy.last".
ERROR: "kcdmuxp1:/tmp/fiber.depot": The software dependencies for 2
products or filesets cannot be resolved.
* "kcdmuxp1:/tmp/fiber.depot": 1 bundles cannot be copied
because none of their filesets can be copied.
* The analysis phase failed for "kcdmuxp1:/tmp/fiber.depot".
* Analysis and Execution had errors.
===============================================

Patch PHKL_28569 is on the system and configured.

Thanking everyone in advance.

Kenny

Re: Swcopy Fiber Channel depot files

Denver Osborn — Thu, 26 May 2005 21:03:12 GMT

add "-x enforce_dependencies=false" to your swcopy syntax. That will tell swcopy to ignore and continue w/ the copy so you can copy one patch then the other into the same depot for a one time install.

swcopy -x enforce_dependencies=false -s /tmp/PHKL_28569.depot \* @ /tmp/your_depot

swcopy -x enforce_dependencies=false -s /tmp/PH_other_patch.depot \* @ /tmp/your_depot

hope this helps,
-denver

Re: Swcopy Fiber Channel depot files

Cem Tugrul — Fri, 27 May 2005 03:08:02 GMT

Hi,
As an addition to Denver,
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=243330
Good Luck,

topic Swcopy Fiber Channel depot files in Operating System - HP-UX

Swcopy Fiber Channel depot files

Re: Swcopy Fiber Channel depot files

Re: Swcopy Fiber Channel depot files