topic booting log in Operating System - HP-UX

booting log

mark.M — Mon, 27 Jun 2005 23:53:19 GMT

k570 class booting log..
is normal log? but i think has problem log
i'm studying HP-UX but i'm not skill, please log analyze.

Re: booting log

Rajeev Shukla — Tue, 28 Jun 2005 00:07:15 GMT

Hi,
The log seems normal and the warning messages you are getting are because you have disabled the selfttest for each CPU, which can be enabled as stated in the log by disabling the book sequence and going to PDC prompt.
Also about some lvols, which can be ignored as they are already commented.

Cheers
Rajeev

Re: booting log

Devender Khatana — Tue, 28 Jun 2005 00:10:35 GMT

Hi,

It is normal. Warning is there as you have disabled self test. & File systems mounting failed message is there as these entries are commented in /etc/fstab file.

HTH,
Devender

Re: booting log

KCS_1 — Tue, 28 Jun 2005 00:18:30 GMT

Hi,HyunMuk

It seems good at all but I would suggest to set selftest routine to be enabled so that full test goes at every booting up.

--------------------------------------------
CPU 0
WARNING: System integrity is at risk: Selftests have been disabled.
Enabling selftests with "ser sel on" will prevent this warning.
--------------------------------------------

BCH > ser sel on

Best wishes,