topic Re: network card not detecting. in Operating System - HP-UX

network card not detecting.

walter crasto_1 — Mon, 11 Jul 2005 02:56:56 GMT

Hi ,

I am having HP ipf (Itnium) server, with HP-UX 11i loaded. Suddenly today we found that machne is not on network. When I check thru SAM it shows no network card instaled.
Thru "ioscan -fnC lan " command I can able to see the card & it shows me claimed. but thur "ifconfig lan0 up " command it gives me socket error.

Can can somebody tell me how to configure the lan0 card.

Regards

Varian

Re: network card not detecting.

Joseph Loo — Mon, 11 Jul 2005 03:18:23 GMT

hi,

just a hunch, is /tmp full?

would u be able to provide the exact error message?

regards.

Re: network card not detecting.

Giacomo TOTTI — Mon, 11 Jul 2005 03:20:11 GMT

Varian,
you have to plumb your interface before configure it!!

#ifconfig lan0 plumb

and check it

#netstat -in

enjoy

Giacomo

Re: network card not detecting.

walter crasto_1 — Mon, 11 Jul 2005 03:58:01 GMT

Hi All,

Thanks for the reply.

I checked none of my file system is full. Also the exact error for ifconfig command is as below,
ifconfig: socket: operaton not supported

Also SAM gives error network card not installed. But "ioscan -fnC lan" shows device is present.

Also note that my server was running fine till today morning & now also server is up with all filesystem mounted but with out network.

regards

Varian

Re: network card not detecting.

Joseph Loo — Mon, 11 Jul 2005 04:12:38 GMT

hi,

refer to this doc for the explanation given on /tmp full:

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000076228916

another way as suggested is to unplumb.

regards.

Re: network card not detecting.

Basheer_2 — Tue, 12 Jul 2005 06:23:31 GMT

What does lanscan and lanadmin show
look in the back of the server for any lights in the network port

ping loopback