topic HPDPS in Operating System - HP-UX

HPDPS

alymarcor — Tue, 19 Jul 2005 12:13:20 GMT

I have a problem with print service. I attach a document with print screen about problem. Tell me if somebody know something about it.

Regards,
alymarcor

Re: HPDPS

Patrol — Tue, 19 Jul 2005 12:18:18 GMT

Please assign more points to the answers provided to you in the past to get a better and faster response.

Your ratio is 0/47 = 0.0

Re: HPDPS

Rick Garland — Tue, 19 Jul 2005 12:18:23 GMT

Telling you the printer is disabled.

Issue the 'enable ' command against the printer.

View the same CDE windows and the ENABLED column will say 'TRUE'

Re: HPDPS

Mahesh Kumar Malik — Wed, 20 Jul 2005 01:18:36 GMT

Hi

As suggested in screen, enable the printer by #enable printer_name and then in GUI ststus should change to True.

You may have to stop and restart the spooler

Regards
Mahesh

Re: HPDPS

Mike Keighley — Wed, 20 Jul 2005 02:21:48 GMT

The status "needs-key-operator" means that the HPDPS supervisor thinks the printer needs physical intervention.

Correct the offline condition, or jetdirect-has-been-unplugged or whatever is physically wrong, then re-enable the HPDPS physical printer object.

Since this is HPDPS, the command to re-enable is:
# pdenable :

rather than the usual
# enable

... or of course you can use Sam.