topic Re: fcmsutil in Operating System - HP-UX

fcmsutil

juan ramos_1 — Wed, 10 Aug 2005 13:35:49 GMT

Hi all
I have a RP4440 with a6795a fc HBA, people from EMC are asking me about the firmware version of the hba, whith the command fcmsutil a get :

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 1Gb
Local N_Port_id is = 0x6c1a13
N_Port Node World Wide Name = 0x50060b0000254d39
N_Port Port World Wide Name = 0x50060b0000254d38
Driver state = ONLINE
Hardware Path is = 0/5/2/0
Number of Assisted IOs = 837748263
Number of Active Login Sessions = 1
Dino Present on Card = NO
Maximum Frame Size = 896
Driver Version = @(#) PATCH_11.11: libtd.a : Jun 28 2002, 11:08:35, PHSS_26799

I would like to know what make reference to firmware in this output or there are another way ?

thanks

Juan Ramos

Re: fcmsutil

Chris Vail — Wed, 10 Aug 2005 13:41:42 GMT

The best way to get this data is with stm or xstm.

Re: fcmsutil

Uday_S_Ankolekar — Wed, 10 Aug 2005 15:37:36 GMT

The Chip Revision Number

Re: fcmsutil

RAC_1 — Wed, 10 Aug 2005 16:03:55 GMT

XL2 Chip Revision No is = 2.3

Re: fcmsutil

Sandman! — Wed, 10 Aug 2005 17:08:44 GMT

Juan,

RAC pointed this out in his reply and another way to do the same using cstm is:

# echo "sel path 0/5/2/0;info;wait;il;exit" | cstm | egrep -i "(major|minor) revision

The output of the above command will show the major and minor revision numbers of your HBA. Concatenating the two gives the chip revision number .. Should match line 3 of fcmsutil output.
XL2 Chip Revision No is = 2.3

cheers!

Re: fcmsutil

Sreedhar Nathani — Wed, 10 Aug 2005 23:55:07 GMT

Hi Juan,

Try this command
#fxmsutil /dev/td0 vpd

** a sample output
V I T A L P R O D U C T D A T A
--------- ------------- -------

Product Discription :'A6795A 2Gbps/1Gbps Fibre Channel 4X PCI HBA'
Part number :'A6795-62001'
Engineering Date Code :'B-4322'
Part Serial number :'A56A00151392'
Misc. Information :'PW=15W'
Mfd. Date :'A-4302'
Check Sum : 0x5b
EFI version : '001.10'
Asset Tag :'NA'

Hope this helps

Re: fcmsutil

Cem Tugrul — Thu, 11 Aug 2005 00:42:04 GMT

Hi Juan,

Also have a look at the link below;

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=946339

Good Luck,

Re: fcmsutil

Mahesh Kumar Malik — Thu, 11 Aug 2005 00:56:20 GMT

Hi Juan

Chip revision number is Firmware No. You may also verify using cstm or mstm utilities

Regards
Mahesh

Re: fcmsutil

juan ramos_1 — Sat, 13 Aug 2005 07:41:09 GMT

Thanks all for helping