topic Re: cmcheckconf error message in Operating System - HP-UX

cmcheckconf error message

Paul Clayton — Tue, 23 Aug 2005 09:58:08 GMT

When I run CMcheckconf, I get an error message as follows.

Warning: Node szaopsd2 does not support enhanced security
Error: One or more nodes in the attempted configuration does not support enhanced security.
cmcheckconf : Unable to verify cluster security.

I have not had much success in finding why or what it requires to satisify this problem.

Re: cmcheckconf error message

Rainer von Bongartz — Tue, 23 Aug 2005 10:03:11 GMT

Please read this document:

http://docs.hp.com/en/6283/SGsecurityfiles.pdf

Regards
Rainer

Re: cmcheckconf error message

melvyn burnard — Tue, 23 Aug 2005 10:19:51 GMT

Out of interest, what patch version do you have for each node in the SG cluster?
do:
what /usr/lbin/cmcld | grep PHSS

It sounds like the nodes have different patch levels.

Re: cmcheckconf error message

Paul Clayton — Tue, 23 Aug 2005 10:22:55 GMT

Reply to both replies.

Rainier. OK been through this document and have done it, but no difference.

Burnand, Seems you may have hit it on the head. There are difference between the two servers.
The first one returned

A.11.16.00 Date: 03/14/05 Patch: PHSS_32731
and the other returned nothing. Very strange, as both servers where loaded at the same time.

Re: cmcheckconf error message

Victor Fridyev — Tue, 23 Aug 2005 10:22:56 GMT

Hi,
What SG version do you work with ?
In any case check difference between /etc/inetd.conf on all computers in the cluster.

HTHG

Re: cmcheckconf error message

Paul Clayton — Tue, 23 Aug 2005 10:38:56 GMT

Problem fixed. It was the patch that caused the problem

Thanx

Re: cmcheckconf error message

melvyn burnard — Tue, 23 Aug 2005 17:54:36 GMT

glad you fixed it, but you might like to think about awarding points to all those kind people that have helped you in the past

Re: cmcheckconf error message

Paul Clayton — Wed, 24 Aug 2005 00:34:19 GMT

OK, well I don't use this forum often, and not sure how the points system works, but here are 10 points.

cheers

Re: cmcheckconf error message

melvyn burnard — Wed, 24 Aug 2005 02:59:12 GMT

Paul, not a problem but if you go here, you can see the questions you have posted:
http://forums1.itrc.hp.com/service/forums/pageList.do?userId=BR688582&listType=question&forumId=1

You can then go through each post and assign points where you think appropriate.

For some info on doing this, read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#28
and refer to the points system.

Also you may wish to take a read of thuis thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=140137

No points for this one please