topic Re: i want to know pci speed in Operating System - HP-UX

i want to know pci speed

???_185 — Thu, 15 Sep 2005 20:15:31 GMT

hi! the machine is rp3410.
When I install this, it is rebooted.
in PCI slot, graphic card is fixed.
I've heard rp3410 have different attribute
each PCI.
anyway, after installing, i typed rad -q or olrad -q to check pci slot speed.
but, terminal shows like this.
:/]# rad -q
rad:ERROR::Capability not implemented

thanks.

Re: i want to know pci speed

Adisuria Wangsadinata_1 — Thu, 15 Sep 2005 20:41:51 GMT

Hi,

If you would like to know the PCI slot speed, all the PCI slot speed can support upto 133 MHz as stated on the block diagram (page 130) on the document at this url :

http://docs.hp.com/en/A7137-96002/A7137-96002.pdf

Hope this information can help you.

Cheers,
AW

PS : dont forget to assign the point, thanks

Re: i want to know pci speed

Stefan Stechemesser — Fri, 16 Sep 2005 06:11:04 GMT

Hi,

please take a look on what a posted a minute before:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=957109

best regards

Stefan

Re: i want to know pci speed

RAC_1 — Fri, 16 Sep 2005 06:28:11 GMT

STM will tell you that.

echo "selpath "hard_ware_path_of_card"'info;wait;infolog"|cstm

Re: i want to know pci speed

Yew Lee — Sat, 17 Sep 2005 02:59:57 GMT

In case you are interested to get "rad" command working, you need to have kernel modules olar_psm and olar_psm_if loaded (for HPUX 11i).

Hope this helps.

Re: i want to know pci speed

Yew Lee — Sat, 17 Sep 2005 03:00:59 GMT

Ops...probably the right way of phrasing is to have the kernel module configured (kmsystem -c Y ....)

In case you are interested to get "rad" command working, you need to have kernel modules olar_psm and olar_psm_if configured (for HPUX 11i).

Hope this helps.