Start SAM ERROR !

Ivan Azuara — Thu, 06 Oct 2005 12:13:26 GMT

Hi !

I'm experimenting an intermittent problem when i launch de SAM utility on HPUX 11.11. This is the message:

# sam
Starting the terminal version of sam...

To move around in sam:

- use the "Tab" key to move between screen elements
- use the arrow keys to move within screen elements
- use "Ctrl-F" for context-sensitive help anywhere in sam

On screens with a menubar at the top like this:

------------------------------------------------------
|File View Options Actions Help|
| ---- ---- ------- ------------------------------- ---|

- use "Tab" to move from the list to the menubar
- use the arrow keys to move around
- use "Return" to pull down a menu or select a menu item
- use "Tab" to move from the menubar to the list without selecting a menu item
- use the spacebar to select an item in the list

On any screen, press "CTRL-K" for more information on how to use the keyboard.

Press "Return" to continue...
sam: FATAL ERROR: Unable to load library "/usr/obam/lib/libIDMawrt.1": Not enoug
h space

The strange is, that problem didn´t appears before and works good sometimes when i launch the utility again (intermittent behavior). My kernel parameters are:

Parameter Current Dyn Planned Module Version
===============================================================================
NSTRBLKSCHED - - 2
NSTREVENT 50 - 50
NSTRPUSH 16 - 16
NSTRSCHED 0 - 0
STRCTLSZ 1024 - 1024
STRMSGSZ 65535 - 65535
acctresume 4 - 4
acctsuspend 2 - 2
aio_listio_max 256 - 256
aio_max_ops 2048 - 2048
aio_physmem_pct 10 - 10
aio_prio_delta_max 20 - 20
allocate_fs_swapmap 0 - 0
alwaysdump 1 - 1
bcvmap_size_factor 2 - 2
bootspinlocks - - 256
bufcache_hash_locks 128 - 128
bufpages 0 - (NBUF*2)
chanq_hash_locks 256 - 256
core_addshmem_read 0 Y 0
core_addshmem_write 0 Y 0
create_fastlinks 0 - 0
dbc_max_pct 15 - 15
dbc_min_pct 5 - 5
default_disk_ir 0 - 0
desfree - - 0
disksort_seconds 0 - 0
dmp_rootdev_is_vol 0 - 0
dmp_swapdev_is_vol 0 - 0
dnlc_hash_locks 512 - 512
dontdump 0 - 0
dskless_node - - 0
dst 1 - 1
effective_maxpid - - ((NPROC<=30000)?30000:(NPROC*5/4))
eisa_io_estimate - - 0x300
enable_idds 0 - 0
eqmemsize 15 - 15
executable_stack 1 - 1
fcp_large_config 0 - 0
file_pad - - 10
fs_async 0 - 0
ftable_hash_locks 64 - 64
hdlpreg_hash_locks 128 - 128
hfs_max_ra_blocks 8 - 8
hfs_max_revra_blocks 8 - 8
hfs_ra_per_disk 64 - 64
hfs_revra_per_disk 64 - 64
hp_hfs_mtra_enabled 1 - 1
hpux_aes_override - - 0
initmodmax 50 - 50
io_ports_hash_locks 64 - 64
iomemsize - - 40000
ksi_alloc_max 224160 - (NPROC*8)
ksi_send_max 32 - 32
lotsfree - - 0
max_async_ports 50 - 50
max_fcp_reqs 512 - 512
max_mem_window 0 - 0
max_thread_proc 200 - 200
maxdsiz 0xfffff000 - 0XFFFFF000
maxdsiz_64bit 0x40000000 - 0X40000000
maxfiles 4096 - 4096
maxfiles_lim 4096 Y 4096
maxqueuetime - - 0
maxssiz 0x800000 - 0X800000
maxssiz_64bit 0x800000 - 0X800000
maxswapchunks 16384 - 16384
maxtsiz 0x4000000 Y 0X4000000
maxtsiz_64bit 0x40000000 Y 0X40000000
maxuprc 4096 Y 4096
maxusers 3500 - 3500
maxvgs 80 - 80
mesg 1 - 1
minfree - - 0
modstrmax 500 - 500
msgmap 258 - (2+MSGTQL)
msgmax 35000 Y 35000
msgmnb 35000 Y 35000
msgmni 50 - 50
msgseg 2048 - 2048
msgssz 20 - 20
msgtql 256 - 256
nbuf 0 - 0
ncallout 49067 - (16+NKTHREAD)
ncdnode 150 - 150
nclist 56100 - (100+16*MAXUSERS)
ncsize 38688 - (NINODE+VX_NCSIZE)+(8*DNLC_HASH_LOCKS)
ndilbuffers 30 - 30
netisr_priority - - -1
netmemmax - - 0
nfile 56489 - (16*(NPROC+16+MAXUSERS)/10+32+2*(NPTY+NSTRPTY+
NSTRTEL))
nflocks 1024 - 1024
nhtbl_scale 0 - 0
ninode 33568 - ((NPROC+16+MAXUSERS)+32+(2*NPTY))
nkthread 49051 - (((NPROC*7)/4)+16)
nni - - 2
no_lvm_disks 0 - 0
nproc 28020 - (20+8*MAXUSERS)
npty 1000 - 1000
nstrpty 1000 - 1000
nstrtel 1000 - 1000
nswapdev 10 - 10
nswapfs 10 - 10
nsysmap 56040 - ((NPROC)>800?2*(NPROC):800)
nsysmap64 56040 - ((NPROC)>800?2*(NPROC):800)
o_sync_is_o_dsync 0 - 0
page_text_to_local - - 0
pfdat_hash_locks 128 - 128
public_shlibs 1 - 1
region_hash_locks 128 - 128
remote_nfs_swap 0 - 0
rtsched_numpri 32 - 32
scroll_lines 100 - 100
scsi_max_qdepth 8 Y 8
scsi_maxphys 1048576 - 1048576
select_enh 0 Y 0
sema 1 - 1
semaem 16384 - 16384
semmap 66 - (SEMMNI+2)
semmni 64 - 64
semmns 128 - 128
semmnu 30 - 30
semmsl 2048 Y 2048
semume 10 - 10
semvmx 32767 - 32767
sendfile_max 0 - 0
shmem 1 - 1
shmmax 0x2cb417800 Y 0X2CB417800
shmmni 1024 - 1024
shmseg 512 Y 512
st_ats_enabled 0 - 0
st_fail_overruns 0 - 0
st_large_recs 0 - 0
st_san_safe 1 - 1
streampipes 0 - 0
swapmem_on 0 - 0
swchunk 2048 - 2048
sysv_hash_locks 128 - 128
tcphashsz 0 - 0
timeslice 10 - (100/10)
timezone 420 - 420
unlockable_mem 50 - 50
vas_hash_locks 128 - 128
vnode_cd_hash_locks 128 - 128
vnode_hash_locks 128 - 128
vol_checkpt_default 10240 - 10240
vol_dcm_replay_size 262144 - (256*1024)
vol_default_iodelay 50 - 50
vol_fmr_logsz 4 - 4
vol_max_bchain 32 - 32
vol_max_nconfigs 20 - 20
vol_max_nlogs 20 - 20
vol_max_nmpool_sz 4194304 - (4*1024*1024)
vol_max_prm_dgs 1024 - 1024
vol_max_rdback_sz 4194304 - (4*1024*1024)
vol_max_vol 8388608 - (8*1024*1024)
vol_maxio 256 - 256
vol_maxioctl 32768 - 32768
vol_maxkiocount 2048 - 2048
vol_maxparallelio 256 - 256
vol_maxspecialio 256 - 256
vol_maxstablebufsize 256 - 256
vol_min_lowmem_sz 524288 - (512*1024)
vol_mvr_maxround 256 - 256
vol_nm_hb_timeout 10 - (10)
vol_subdisk_num 4096 - 4096
vol_vvr_transport 1 - (1)
vol_vvr_use_nat 0 - (0)
volcvm_cluster_size 16 - 16
volcvm_smartsync 1 - 1
voldrl_max_drtregs 2048 - 2048
voldrl_min_regionsz 512 - 512
voliomem_chunk_size 65536 - (64*1024)
voliomem_maxpool_sz 4194304 - (4*1024*1024)
voliot_errbuf_dflt 16384 - 16384
voliot_iobuf_default 8192 - 8192
voliot_iobuf_limit 131072 - 131072
voliot_iobuf_max 65536 - 65536
voliot_max_open 32 - 32
volraid_rsrtransmax 1 - 1
vps_ceiling 16 - 16
vps_chatr_ceiling 1048576 - 1048576
vps_pagesize 4 - 4
vx_fancyra_enable 0 - 0
vx_maxlink 32767 - 32767
vx_ncsize 1024 - 1024
vx_ninode 8192 - 8192
vxfs_max_ra_kbytes 1024 - 1024
vxfs_ra_per_disk 1024 - 1024
vxtask_max_monitors 32 - 32

I have 10Gbytes of RAM

Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 4096 0 4096 0% 0 - 1 /dev/vg00/lvol2
dev 4096 0 4096 0% 0 - 0 /dev/vghitachiswap/l
v_swap2
dev 4096 0 4096 0% 0 - 0 /dev/vghitachiswap/l
v_swap3
reserve - 2540 -2540
total 12288 2540 9748 21% - 0 -

# bdf | grep vg00
/dev/vg00/lvol3 204800 138000 66328 68% /
/dev/vg00/lvol1 298928 118984 150048 44% /stand
/dev/vg00/lvol8 4710400 1242160 3441384 27% /var
/dev/vg00/lvol7 2080768 1375704 699608 66% /usr
/dev/vg00/lvol4 204800 127480 76776 62% /tmp
/dev/vg00/lvol6 3317760 2125600 1182904 64% /opt
/dev/vg00/lvol5 24576 5752 18688 24% /home

Somebody have an idea ?

Thank's in advance !!

Re: Start SAM ERROR !

Mel Burslan — Thu, 06 Oct 2005 12:16:17 GMT

what is your sam cumulative patch level ? you can find it by:

swlist -l product | grep -i sam

it will show you something like this:

PHCO_28123 1.0 cumulative SAM patch

if your is not upto dat, it is advisable to download most uptodate version and install it.

Re: Start SAM ERROR !

Ivan Azuara — Thu, 06 Oct 2005 12:28:37 GMT

The patch is the next:

PHCO_31314 1.0 cumulative SAM patch

---------------------------------------------
Patch Name: PHCO_31314

Patch Description: s700_800 11.11 cumulative SAM patch

Creation Date: 05/03/23

Post Date: 05/04/28

Hardware Platforms - OS Releases:
s700: 11.11
s800: 11.11

This the most and recommended cumulatuve patch for SAM in HPUX 11.11.

Another idea ?

Re: Start SAM ERROR !

Devender Khatana — Thu, 06 Oct 2005 13:03:21 GMT

Hi,

The message indicated is not enough space. Could you find out the utilization of some important system parameters at different intervals. Check nfile/nproc using glance if you have or use sar for this.

#sar -v 2 5

I assume that some of the parameter is allmost fully utilizaed which is causing this intermittent behaviour)

HTH,
Devender

Re: Start SAM ERROR !

Ivan Azuara — Thu, 06 Oct 2005 14:56:34 GMT

# sar -v 2 5

HP-UX b_inb_07 B.11.11 U 9000/800 10/06/05

14:53:40 text-sz ov proc-sz ov inod-sz ov file-sz ov
14:53:42 N/A N/A 154/28020 0 1483/33568 0 1568/56499 0
14:53:44 N/A N/A 154/28020 0 1483/33568 0 1569/56499 0
14:53:46 N/A N/A 154/28020 0 1483/33568 0 1569/56499 0
14:53:48 N/A N/A 154/28020 0 1483/33568 0 1566/56499 0
14:53:50 N/A N/A 154/28020 0 1483/33568 0 1568/56499 0

I donÂ´t see a limited value ?

Best Regards !

Re: Start SAM ERROR !

Adisuria Wangsadinata_1 — Thu, 06 Oct 2005 21:44:41 GMT

Hi,

Check this document (docID : 2200131595) about 'SAM: fatal error, Unable to load library... Not enough space' :

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000080094840

Hope this information can help you.

Cheers,
AW

Re: Start SAM ERROR !

Ivan Azuara — Fri, 07 Oct 2005 13:10:10 GMT

My problem continuos.

In some papers recommend that the value for shmmax parameter must be the same that the TOTAL of RAM, that's true ?.

In order to provide more information about this problem, i'm running over Sybase 12.5.2 for Database Manager.

Thank's in advance !!

Re: Start SAM ERROR !

Bharat Katkar — Fri, 07 Oct 2005 13:34:53 GMT

Hi Ivan,

Probably you need to go throughly through the Sybase 12.5.2 documents/release notes to find out what all kernel parameters to be set and thier significance on resource utilization. Probably that shoudl solve your problem. It doesn't look like HPUX OS specific problem.

Regards,

topic Re: Start SAM ERROR ! in Operating System - HP-UX

Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !

Re: Start SAM ERROR !