topic Re: telnet connection refused error in Operating System - HP-UX

telnet connection refused error

Shivkumar — Thu, 17 Nov 2005 15:41:22 GMT

Dear Sirs,

We are not able to connect to server using telnet, ssh and ftp. Getting connection refused errors.

What could be the issue ?
Appreciate any help.

Thanks,
Shiv

Re: telnet connection refused error

James R. Ferguson — Thu, 17 Nov 2005 15:44:18 GMT

Hi Shiv:

At the console, try restarting 'inetd':

# inetd -c

Regards!

...JRF...

Re: telnet connection refused error

HGN — Thu, 17 Nov 2005 15:45:21 GMT

Hi

For telnet to work you need to check and make sure that in inetd.conf file telnet is not commented out, also check if inetd is running,you need to re-read the inetd.conf to make the changes effective.
For ssh not working have to check if the ssh daemon is running and the settings are correct in sshd_config file.

Rgds

HGN

Re: telnet connection refused error

rmueller58 — Thu, 17 Nov 2005 15:50:21 GMT

Shiv,

go to the Console, check what your init status is.. should be init 3.

if the system has been running and active with these before sounds maybe something has ran amuk..

do a BDF make sure all volumes are mounted.

go into GSP and check the error logs

more /var/adm/syslog/syslog.log

You should see in the sys log if SSH is started..

Re: telnet connection refused error

Ivan Ferreira — Thu, 17 Nov 2005 16:16:17 GMT

Verify the status of the interfaces with ifconfig and netstat -ni. Check that you are receiving packages.

From the server can you ping other hosts?

Re: telnet connection refused error

Shivkumar — Thu, 17 Nov 2005 19:04:47 GMT

Is there a way to login remotely without telnet ?

I mean we have root access to the box. Can we login and restart the inetd ?
Is GSM used for this ?

warm regards,
Shiv

Re: telnet connection refused error

Joseph Loo — Thu, 17 Nov 2005 19:54:32 GMT

hi,

if u r not getting any form of connections, i.e. telnet, ssh, ftp, http, https, etc, i do not suppose u will be able to login remotely.

thus, u have to proceed to the console and verify what exactly is happening to your server, network cards, connections, inetd not started, etc.

regards.

Re: telnet connection refused error

Shivkumar — Thu, 17 Nov 2005 21:12:54 GMT

Server is running applications fine. Only we can't connect through telnet, ssh and ftp.

What are the ways to access it now ?

warm regards,
Shiv

Re: telnet connection refused error

Bill Hassell — Thu, 17 Nov 2005 22:05:54 GMT

Standard HP-UX comes with telnet and ftp enabled, someone has disabled these functions. Let's start with the basics: Can a computer that is located on the same network (subnet) ping and telnet to the problem box? If so, your problem is with routers that have disabled communication to this box.

If local computers cannot connect to this box with telnet, it is possible someone has excluded a range of computers in /var/adm/inetd.sec so look at this file for deny statements.

Re: telnet connection refused error

Indira Aramandla — Thu, 17 Nov 2005 22:16:07 GMT

Hi Shivkumar,

Can you ping that server. Could it be a DNS names resolution. Did you try using the IP address.

IA

Re: telnet connection refused error

Shivkumar — Fri, 18 Nov 2005 00:41:53 GMT

Only ping is working fine and applications running okay.

Re: telnet connection refused error

RAC_1 — Fri, 18 Nov 2005 01:22:07 GMT

Unless you log onto server, it is difficult to troubleshoot. Can you log onto GSP and from console??

If nothing is working, booting system into single user mode and troublshoot from there.

Re: telnet connection refused error

Yogeeraj_1 — Fri, 18 Nov 2005 02:56:27 GMT

hi,

can you try to put the IP address of the host in the /etc/hosts file?

What does the "last |head " command show after a failed loggon attempt?

can you try to telnet the server from the console itself?

e.g. telnet 192.168.1.12

regards
yogeeraj

Re: telnet connection refused error

Shivkumar — Fri, 18 Nov 2005 13:10:55 GMT

How GSP works ? I mean how to login to GSP ?
Sorry i am new to unix world :-((

Thanks,
Shiv

Re: telnet connection refused error

Bill Hassell — Fri, 18 Nov 2005 14:48:51 GMT

The GSP is a special connection to the processor. You access it by going to the console (the real console) mand typing CTRL-B which will bring up the CM prompt. However, this will provide no help at all with your networking. The GSP only knows about the hardware and knows nothing about HP-UX or the telnet and ftp services.

When you say that the system is running as a production server, what does it do? Does anyone login to this server, or is it a specialized web or database server with no user logins?

Re: telnet connection refused error

Shivkumar — Sat, 19 Nov 2005 03:45:06 GMT

Bill,

Thanks for explaining me. I guess console login is allowed connecting to a switch via ip: port. Probably console login is used to reboot the server and to view the error messages on the screen (console). In production environment i think serial ports of the servers might be connected to switch ports and we connect to it for console login. I was thinking that this is an alternative way to remotely connect to hpux box without telnet.

Appreciate if i am corrected.

Regards,
Shiv

Re: telnet connection refused error

Bharat Katkar — Sat, 19 Nov 2005 03:59:08 GMT

Hi Shiv,
You are absolutely correct. Also in addition to this there is one more way to connect to the console.

Two Approaches are as:

1. Get a Dig Box (Swicth..) and connect one of it's port to the CONSOLE port of the server. Then you can telnet to the (dig box IP):(digi box port no.) and you get the console of that server.

2. Configure you LAN Console port and connect the lan directly to the Network Switch. Then you can directly telnet to the IP defined for lan Management Port. This will also give you the console.

Hope that helps,.
Regards,

Re: telnet connection refused error

Shivkumar — Sat, 19 Nov 2005 22:02:53 GMT

Thanks everybody!!

The root cause was someone used the command "kill -3 1". It caused the system to become unstable.