topic Re: emc bcv's mount error in Operating System - HP-UX

emc bcv's mount error

jerry1 — Mon, 09 Jan 2006 13:28:52 GMT

When I try to mount our bcv's from the emc
to an HP-UX 11.0 box I get the following
error. It works on other systems but they are
11i. I was told it use to work on this 11.0
system. All patches applied from patch analysis.

+ /usr/sbin/mount -r /dev/vg40/lvol1 /bcv_u940
mount - unrecognized vxfs version number

Any ideas?

Re: emc bcv's mount error

James R. Ferguson — Mon, 09 Jan 2006 14:08:42 GMT

Hi Jerry:

On 11i, JFS 3.3 is the default JFS version installed. In turn, JFS 3.3 creates version-4 VxFS filesystems by default. Version-4 filesystems require JFS 3.3 or later. You must run JFS 3.3 on 11.0, not JFS 3.1 as was originally available.

Regards!

...JRF...

Re: emc bcv's mount error

Tom Danzig — Mon, 09 Jan 2006 16:12:35 GMT

man vxupgrade

Re: emc bcv's mount error

James R. Ferguson — Mon, 09 Jan 2006 16:23:11 GMT

Hi:

Yes, 'vxupgrade' will upgrade a JFS filesystem version level, *but*, as the manpages note: "Once a file system has been upgraded to Version 4, it is no longer mountable on...HP-UX 11.0 without JFS 3.3 from Application CD".

Regards!

...JRF...