topic Re: How to use tusc utility on hp-ux in Operating System - HP-UX

How to use tusc utility on hp-ux

Syed Moinuddin_1 — Sat, 11 Feb 2006 03:16:07 GMT

Hi gurus,
I installed tusc utility to trace the process as i am getting problem in my database and Oracle recommend to trace the process when my DB listener hangs.
Steps done by me:
--Downloaded the file "tusc-7.8-ia64-11.23.depot.gz"
-- unzip on windows.
-- send as binary to /var/spool/sw/tusc-7.8-ia64-11.23.depot
-- installed software from sam
-- i can view the software from swlist

I run tusc as
# ps -ef|grep PMON
root 17706 17577 0 10:59:21 pts/0 0:00 grep PMON
# tusc -afpo 17706
sh: tusc: not found.

Please help to solve the problem.

Thanks,
Syed MOin

Re: How to use tusc utility on hp-ux

Sivakumar TS — Sat, 11 Feb 2006 03:34:39 GMT

Hi,

Its because the PATH variable is not set.

1. #find / -name tusc -print

==> to check the location of the binary.

2. Add this folder to the existing PATH variable in .profile.

3. Alternatively you can excute the tusc with FULL PATH.

With Regards,

Siva.

Re: How to use tusc utility on hp-ux

Syed Moinuddin_1 — Sat, 11 Feb 2006 04:30:02 GMT

Hi Siva,

Thanks for ur prompt response,
# find / -name tusc -print
/var/adm/sw/products/tusc
/usr/local/bin/tusc
/usr/local/doc/tusc

Which path should be set in .profile
and how can i run tusc with fullpath . can you pls explain me clearly

Re: How to use tusc utility on hp-ux

Amitkumar_1 — Sat, 11 Feb 2006 04:39:27 GMT

HELLO SYED,

add /usr/local/bin/tusc entry in your .profile file.
it will help succesful execution of tusc binary.

Re: How to use tusc utility on hp-ux

Yogeeraj_1 — Sat, 11 Feb 2006 05:30:45 GMT

hi,

you should use /usr/local/bin/tusc

hence /usr/local/bin should be in the PATH

see: http://hpux.cs.utah.edu/hppd/cgi-bin/wwwtar?/hpux/Sysadmin/tusc-7.8/tusc-7.8-src-11.11.tar.gz+tusc-7.8/HPUX.Install+text

kind regards
yogeeraj

Re: How to use tusc utility on hp-ux

Sivakumar TS — Sat, 11 Feb 2006 06:21:36 GMT

Hi Syed,

Normally "bin" folder contains the binaries/executables for any product.

So pls add the ../bin folder to the PATH and it should work now.

With Regards,

Siva.

Re: How to use tusc utility on hp-ux

Sivakumar TS — Sat, 11 Feb 2006 06:26:13 GMT

To run with full path,

taking your example itself

1. # ps -ef|grep PMON
root 17706 17577 0 10:59:21 pts/0 0:00 grep PMON

2. instead of doing,

#tusc -afpo 17706

Please run,

#/usr/local/bin/tusc -afpo 17706

With Regards,

Siva.

Re: How to use tusc utility on hp-ux

Syed Moinuddin_1 — Sat, 11 Feb 2006 09:07:30 GMT

Hi,
Thanks for all , when i read .profile file it mention as
# Do not put "/usr/local/bin" in PATH; it is a security potential breach

PATH=/usr/sbin:$PATH:/sbin:/home/root
where should i add in the path or just as /usr/local/bin/tusc

when i run as
# /usr/local/bin/tusc -afpo 20992
Usage: tusc [-] -OR-
-a: show exec arguments
-A: append to output file
-b bsize: dump 'bsize' max bytes (-r/-w)
-B start[/stop]: show targets of taken-branches
-c: count syscalls instead of printing trace
-C: like -c but also print high/low/average stats
-d [+][!][fd | all]: select only syscalls using fd
-e: show environment variables
-E: show syscall entries
-f: follow forks
-F: show kernel's ttrace feature level
-g: don't attach to members of my session
-h: show state of all processes when idle
-i: don't display interruptible syscalls
-I start[/stop]: single-step and show instructions
-k: keep alive (wait for *all* processes)
-l: print lwpids
-L [!]lwps: [un]select these lwps
-n: print process names
-o [file|fd]: send trace output to file or fd
-p: print pids
-Q: be quiet about some warnings
-r [!][fd | all]: dump read buffers
-R: show syscall restarts
-s [!]syscalls: [un]select these syscalls
-S [!]signals: [un]select these signals
-t: detach process if it becomes traced
-T timestamp: print time stamps
-u: print user thread IDs (pthreads)
-v: verbose (some system calls only)
-V: print version
-w [!][fd | all]: dump write buffers
-x: print raw (hex) arguments
-X: print data in an exportable format
-y: register verbosity (with -I)
-z: only show failing syscalls

Thanks for all participants

Syed MOin

Re: How to use tusc utility on hp-ux

Steven E. Protter — Sat, 11 Feb 2006 13:50:06 GMT

Shyalom Syed,

Set the Process ID to the process you want to monitor.

#ppid collected above
proc=$ppid
/usr/contrib/bin/tusc -o $1 -p $proc &

Basically you have two usual methodologies.

You can hang tusc on a process and redirect the output to a file or you can use tusc to start the process.

In the case of monitoring an Oracle Listener process, the methodology above should work because I'd surmise the listener is started at the same time as the database.

SEP

Re: How to use tusc utility on hp-ux

Syed Moinuddin_1 — Sun, 12 Feb 2006 03:44:26 GMT

Hello experts,

let me explain u guys my exact problem
my Oracle listener is hanging and i want to trace by using tusc recommended by oracle to view the log
when i use as lsnrctl and want to check the status its hang
i dont know how to trace the process and which process id should db traced at the time when listener hangs
if any oracle DBA's got the same problem let me know pls
i am just getting the process id by
#ps -ef|grep PMON
#/usr/local/bin/tusc -za 22071
and it gives me error as
tusc: getproc(22071): No such process
tusc: process 22071 (""): No such process.
tusc: no process to attach to

no replies about mentioning /usr/local/bin/tusc in ".profile"

any recommendations will be highly appreciated and helpful for me

Thanks,
Syed Moin

Re: How to use tusc utility on hp-ux

Steven E. Protter — Sun, 12 Feb 2006 04:32:32 GMT

Syed,

You don't want to use tusc in .profile.

proc=$(ps -fu tnslisten | awk '{print $2}')

/usr/contrib/bin/tusc -o $1 -p $proc > /tmp/tsuc.log &

This will do it. Your output will be in a file which you can compress and upload to Oracle support.

SEP

Re: How to use tusc utility on hp-ux

Syed Moinuddin_1 — Sun, 12 Feb 2006 07:41:49 GMT

hi,

today i got the same problem and i follow the steps provided by u
but still it doesnt work
my tusc is installed on /usr/local/bin/tusc
so i tried as /usr/local/bin/tusc -o $1 -p $proc > /tmp/tsuc.log &

proc=$(ps -fu tnslisten | awk '{print $2}')
doesnt work 2 it shows unknown command tnslisten i tried with listener also

any more tips please

thanks,
syed

Re: How to use tusc utility on hp-ux

Steven E. Protter — Sun, 12 Feb 2006 09:12:42 GMT

change tnslisten to the actual name of your listener process.

The process name varies with Oracle version.

SEP

Re: How to use tusc utility on hp-ux

Syed Moinuddin_1 — Wed, 15 Feb 2006 01:29:57 GMT

Thanks,
I tried with the name of listener but still it doesn't work may be there is a little bit mistake by me. can u let me know what exact steps to check tusc on listener. my listener name is default LISTENER with oracle ver10g(10.1.0.4.0)

Thanks once again

Syed Moin