topic ignite backup problem in Operating System - HP-UX

ignite backup problem

Shah Gaurang B. — Wed, 22 Mar 2006 04:50:26 GMT

Hi Friends,

I have 2 itanium servers . One server is having backup drive . Now i have to take ignite backup of unother server of vg00 without disconnecting backup drive from other server because to connect it i also need controller of unother server . Both servers are in same network.so is there any special command through which i can take ignite backup. Pl. guide me to solve this problem

Re: ignite backup problem

RAC_1 — Wed, 22 Mar 2006 04:52:48 GMT

man make_net_recovery

Re: ignite backup problem

Raj D. — Wed, 22 Mar 2006 05:02:05 GMT

Hi Shah ,

You can use make_net_recovery to take backup of the other server , where tape drive is not present.

To setup an ingite server for network backup check this command:

/opt/ignite/bin/ignite.

hth,
Raj.

Re: ignite backup problem

Raj D. — Wed, 22 Mar 2006 05:04:37 GMT

Shah(Again),

Also you can check this good document to setup an Ignite server , to take the Ignite backup over the network :

http://docs.hp.com/en/B2355-90153/ch04s03.html

Cheers,
Raj.