topic Re: Getting rid of the banner page in Operating System - HP-UX

Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 18:58:32 GMT

We recently upgraded to Win2k on several PCs and since then we've not been able to remove the bannor page from our network printer, 5si. I found a discussion on this forum from January 2001 which seems to offer a solution(See below) However I am new to Telnet and am interested in knowing how to do this. Can anyone help?

"As it turned out this printer (HP 8000 DN) had a JetDirect card and all I had to do was to telnet to the card and issue;
banner: 0

(and the bannerpage i question was infact a trailerpage...:)

thanks anyway

Andreas "

Re: Getting rid of the banner page

John Poff — Tue, 05 Jun 2001 19:02:11 GMT

Just try

telnet printername

On the HP 8000 series it puts you into a command shell with a > prompt. From there, you can type

banner 0

to disable the banner. Then type "quit" to save and exit.

Re: Getting rid of the banner page

A. Clay Stephenson — Tue, 05 Jun 2001 19:11:15 GMT

Hi,

John's almost correct; it's 'banner:0'.

Clay

Re: Getting rid of the banner page

John Poff — Tue, 05 Jun 2001 19:20:37 GMT

Doh! Thanks, Clay!

Also, my 8050N has a web interface. Just point your browser to the IP address. Interestingly though, you can't turn off/on the banner page through the web interface.

JP

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 19:33:20 GMT

I have done the telnet change and the banner shows to be disabled however I'm still getting a banner page. Any ideas about what to do now?

Re: Getting rid of the banner page

John Poff — Tue, 05 Jun 2001 19:37:47 GMT

Ok. Is it happening from HP-UX (when you lp a file to the printer) or is it just happening from Win2k? There might be some banner settings in Win2k, but I'll have to ask the wizard in the next cubicle about that one.

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 19:43:24 GMT

It is only on our Win2K and NT machines.

Re: Getting rid of the banner page

John Poff — Tue, 05 Jun 2001 19:52:51 GMT

Try looking in the printer settings in Win2k. My local wizard took me to a tab in the settings where you can specify a separator page.

Re: Getting rid of the banner page

MANOJ SRIVASTAVA — Tue, 05 Jun 2001 19:58:04 GMT

Hi Lori

Here is what you have to do:

1. Edit /usr/spool/lp/initerface/model.orig/ and make BANNER="no"

2. Also around lines no 1071 hash the line

# banner = $ BANNER

3. stop the schedule < lpshut >

4. start it again < lpsched >

and you will have no banners .All the best.

Manoj Srivastava

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 20:02:39 GMT

Are you talking about the Separator page button on the printer properties? I found that too. That's one of the things we've been working with for a long time. Somewhere I read a command to put in that box so it wouldn't print but that didn't work.

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 20:22:37 GMT

Manoji,

Is this editing done in the Registry or where?

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 20:26:10 GMT

Oops, Manoj, Sorry for miss typing your name. My fingers aren't cooperating. :-)

Re: Getting rid of the banner page

MANOJ SRIVASTAVA — Tue, 05 Jun 2001 20:39:45 GMT

Hi Lori

Infact I am the one to feel sorry as I didnt read you well , the solution I gave was for a network printer on a Unix Server, for a Desktop /windows operating system I dont have any ideas as of now. But in case you have a Unix server driving the printer then this is the solution.

Manoj Srivastava

Re: Getting rid of the banner page

Lori C. — Tue, 05 Jun 2001 20:49:37 GMT

No problem Manoj, at least now I know how to fix it for Unix.

I appreciate everyone's input. That's it for me today. If anyone runs into any other ideas PLEASE let me know, we aren't able to do our conversion until we get this problem resolved.

Lori

Re: Getting rid of the banner page

Lori C. — Wed, 06 Jun 2001 15:09:44 GMT

It seems this banner issue is a common problem when a printer is located on a Netware Server and the only way to fix it is through Netware Client on the server. Here's an answer on one forum http://discussions.virtualdr.com/Forum4/HTML/002440.html.
I found the same answer on the Microsoft website. We don't have access to the Netware Server this printer is on so I can't test it but with everything I've read I have no doubt it would work. We will just put up with the annoyance until we can move the printer to our server.

Thank you to everyone for the input!! I learned how to telnet which is a big help! I should have given more points on that one... sorry.

Lori

Re: Getting rid of the banner page

Mark Fenton — Wed, 06 Jun 2001 21:49:03 GMT

Lori -- actually, the solution should be fairly simple, and doesn't require access to the netware server any greater than is required for printer access.

In the control panel on the windbloz box, find the CSNW tab. This is where the user can specify which should be the default netware server to connect to. In that box there's a check box entitled "print banner". Uncheck the box, and you should not have any more banner pages printing either before or after the print job.

This same issue has caused several calls to my desk from users about the campus here. (We won't talk about what happened when we tried to convert to MS Print services!)

Hope you can resolve the issue with minimal fuss.

Mark

Re: Getting rid of the banner page

Lori C. — Thu, 07 Jun 2001 12:12:34 GMT

Mark, You are wonderful!!! That did it. I think we'll through a party in your honor. Thank you so much for your help.

Lori