topic Re: Config files for IP Logical Interface in Operating System - HP-UX

Config files for IP Logical Interface

OLIVA_1 — Fri, 28 Apr 2006 04:29:26 GMT

Hello,

I would like know which configuration files is concerned by "IP Logical Interface" ?
I know how I can add/remove/modify an IP Logical Interface via SAM, but I don't know where are the files which contain IP Logical Interface configuration ?

Thanks,

Re: Config files for IP Logical Interface

Warren_9 — Fri, 28 Apr 2006 04:33:40 GMT

Hi,

The network interface is configure in the /etc/rc.config.d/netconf.

GOOD LUCK!

Re: Config files for IP Logical Interface

Sergejs Svitnevs — Fri, 28 Apr 2006 04:34:38 GMT

/etc/rc.config.d/netconf and /etc/hosts files contain the ip addresses of all interfaces.

Regards

Re: Config files for IP Logical Interface

OLIVA_1 — Fri, 28 Apr 2006 04:35:02 GMT

No, /etc/rc.config.d/netconf file doesn't manage "IP Logical Interface"...

Re: Config files for IP Logical Interface

RAC_1 — Fri, 28 Apr 2006 04:41:04 GMT

File /etc/rc.config.d/netconf manages it.

IP_ADDRESS[1]=xx.y.z.er
SUBNET_MASK[1]=255.255.255.0
INTERFACE_NAME[1]=lan0
BROADCAST_ADDRESS[1]=aa.b.d.cc
INTERFACE_STATE[1]=up

Re: Config files for IP Logical Interface

OLIVA_1 — Fri, 28 Apr 2006 04:51:12 GMT

This is my /etc/rc.config.d/netconf file :

saro121:(/var/sam/log)(root)#cat /etc/rc.config.d/netconf | grep -v ^#

HOSTNAME="saro121"
OPERATING_SYSTEM=HP-UX
LOOPBACK_ADDRESS=127.0.0.1

INTERFACE_NAME[0]=lan0
IP_ADDRESS[0]=192.168.5.28
SUBNET_MASK[0]=
BROADCAST_ADDRESS[0]=""
INTERFACE_STATE[0]=""
DHCP_ENABLE[0]=0
INTERFACE_MODULES[0]=""

ROUTE_MASK[0]=""
ROUTE_ARGS[0]=""

GATED=0
GATED_ARGS=""

RDPD=0

RARP=0

DEFAULT_INTERFACE_MODULES=""
IP_ADDRESS[2]=192.168.75.2
SUBNET_MASK[2]=255.255.255.0
INTERFACE_NAME[2]=lan2
BROADCAST_ADDRESS[2]=192.168.75.255
INTERFACE_STATE[2]=up
ROUTE_DESTINATION[0]=default
ROUTE_GATEWAY[0]=192.168.5.1
ROUTE_COUNT[0]=1
saro121:(/var/sam/log)(root)#

This is my IP Logical Interfaces configured:

saro121:(/var/sam/log)(root)#netstat -rn
IPv4 Routing tables:
Destination Gateway Flags Refs Interface Pmtu
127.0.0.1 127.0.0.1 UH 0 lo0 4136
192.168.5.33 192.168.5.33 UH 0 lan0:2 4136
192.168.5.32 192.168.5.32 UH 0 lan0:1 4136
192.168.5.34 192.168.5.34 UH 0 lan0:3 4136
192.168.5.28 192.168.5.28 UH 0 lan0 4136

Where do you see IPs 192.168.5.32, 192.168.5.33, 192.168.5.34 ????

Re: Config files for IP Logical Interface

Sergejs Svitnevs — Fri, 28 Apr 2006 05:12:54 GMT

netconf file manages logical interface:

http://docs.hp.com/en/B2355-90796/ch03s04.html

Re: Config files for IP Logical Interface

Torsten. — Fri, 28 Apr 2006 05:17:29 GMT

Do you use additional software like APA or ServiceGuard?

Re: Config files for IP Logical Interface

Sยภเl Kย๓คг — Fri, 28 Apr 2006 06:52:19 GMT

Hi,

Check the timestamp of /etc/rc.config.d/netconf file to find out any modifications happend to this file when you added Logical interfaces using SAM

HPUNIX has /etc/rc.config.d/netconf file to store interface related setting default.

Can you try restarting net service and check #netstat -rn

Regards,
Sunil

Re: Config files for IP Logical Interface

Sยภเl Kย๓คг — Fri, 28 Apr 2006 06:53:37 GMT

Hi,

And also try netstat -r, and ensure all hosts shown in the o/p is the same.

Regards,
Sunil

Re: Config files for IP Logical Interface

Torsten. — Fri, 28 Apr 2006 07:10:54 GMT

Please provide the output of

# lanscan

Re: Config files for IP Logical Interface

Sergejs Svitnevs — Fri, 28 Apr 2006 07:15:21 GMT

Could you post the output of "netstat -in" and your netconf file also?

Regards

Re: Config files for IP Logical Interface

OLIVA_1 — Fri, 28 Apr 2006 07:59:44 GMT

That's my lanscan output :

saro121:(/var/sam/log)(root)#lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/1/2/0 0x0014C26565DE 0 UP lan0 snap0 1 ETHER Yes 119
0/1/2/1 0x0014C26565DF 1 UP lan1 snap1 2 ETHER Yes 119
0/2/1/0 0x0012799D92B7 2 UP lan2 snap2 3 ETHER Yes 119
saro121:(/var/sam/log)(root)#

Yes I have Service Guard installed on this serveur.

saro121:(/var/sam/log)(root)#netstat -in
IPv4:
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lan0:1 1500 192.168.5.0 192.168.5.32 49412492 0 238533 0 0
lan2 1500 192.168.75.0 192.168.75.2 2293001 0 1176071 0 0
lan0:3 1500 192.168.5.0 192.168.5.34 24309 0 5398 0 0
lan1* 1500 none none 0 0 0 0 0
lan0:2 1500 192.168.5.0 192.168.5.33 14902049 0 96792 0 0
lan0 1500 192.168.5.0 192.168.5.28 995736580 0 535127527 0 0
lo0 4136 127.0.0.0 127.0.0.1 4044697 0 4044697 0 0

IPv6:
Name Mtu Address/Prefix Ipkts Opkts
lan1* 1500 none 0 0
lo0 4136 ::1/128 6000 6000
saro121:(/var/sam/log)(root)#

Re: Config files for IP Logical Interface

Torsten. — Fri, 28 Apr 2006 08:19:31 GMT

Consider these are your clusters package addresses.
see man cmquerycl for details.

Re: Config files for IP Logical Interface

OLIVA_1 — Fri, 28 Apr 2006 09:06:20 GMT

I know it is linked with my cluster pkg.
But I don't understand why I can't find nothing about this IP logical interface configuration in some conf files.
I find some information via SAM tool...

It's strange...

Re: Config files for IP Logical Interface

Torsten. — Fri, 28 Apr 2006 13:26:48 GMT

It's not that strange.

Your cluster config files are typically under

/etc/cmcluster

there are directories for the different packages. There is the control file. In this file are the configured IP addresses for the package

e.g.

#IP ADDRESSES
IP[0]=192.168.2.100
SUBNET[0]=255.255.255.0

This is was you're looking for.

see "man cmgetconf" or "man cmquerycl"