topic Re: config sendmail in Operating System - HP-UX

config sendmail

Daniel Aquere de Olivei — Tue, 02 May 2006 13:06:48 GMT

Hi,
I´m trying to send a mail when my backup routine presents problems.
Something of the type:
"mailx -s "subject text" daniel.oliveira@primesys.com.br < text_error.txt"
The following error message is showed:
"NIS map mail.aliases specified, but NIS not running
Switch map aliases: unknown member map aliases.dns"
And the message is not sent.
Please, which does anybody know the configurations that I should do? For instance, where I configure the name/IP of the mail server, etc

I use HP-UX 11.0.

Thanks.

Daniel

Re: config sendmail

Kent Ostby — Tue, 02 May 2006 13:19:15 GMT

This is a known issue which can be found in HP's document: KBRC00004772

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=KBRC00004772

Re: config sendmail

Geoff Wild — Tue, 02 May 2006 13:41:35 GMT

Check out /etc/nsswitch.conf

Probably want:
hosts: dns [NOTFOUND=CONTINUE] hosts

Make sure dns servers are in /etc/resolv.conf

To configure relay server, modify the DS macro in /etc/mail/sendmail.cf to be:

DSyouremailserver.yourdomain.com

Rgds...Geoff

Re: config sendmail

Daniel Aquere de Olivei — Tue, 02 May 2006 14:14:11 GMT

Hi,
I changed the parameters.

When I execute: "mailx -s "subject text" daniel.oliveira@primesys.com.br < text_error.txt"

The error message is showed:
"NIS map mail.aliases specified, but NIS not running"

Daniel

Re: config sendmail

Kent Ostby — Tue, 02 May 2006 14:15:12 GMT

Daniel -- The document I posted above addresses that issue.

Best regards,

Oz

Re: config sendmail

Steven E. Protter — Tue, 02 May 2006 14:58:23 GMT

Shalom Daniel,

Sounds like a good time to check /etc/nsswitch.conf and see if this machine is part of an NIS domain and if so if appropriate servcies are running.

SEP

Re: config sendmail

Daniel Aquere de Olivei — Tue, 02 May 2006 15:04:02 GMT

Mrs,

Is NIS really necessary? If yes, as I do to initialize it?

Tks

Daniel

Re: config sendmail

Mark Greene_1 — Tue, 02 May 2006 15:42:27 GMT

NIS is NOT necessary.

In /etc/resolve.conf, in addition to the hosts parameter, makes sure that if these parameters are present that they only have "files" and not also "nis":

aliases: files
services: files
sendmailvars: files

You may need to restart the sendmail daemon if you changed any of these.

mark