Eva 3000

HDgio — Fri, 26 May 2006 09:57:26 GMT

Hi
I have one EVA3000 with two RP4440 connected
but I can't see it this is the output of ioscan:
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
tty 0 0/0/1/0 asio0 CLAIMED INTERFACE PCI SimpleComm (1)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/0/1/1 asio0 CLAIMED INTERFACE PCI Serial (103c1)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
usb 0 0/0/2/0 hcd CLAIMED INTERFACE NEC USB Interface
usbhub 0 0/0/2/0.1 hub CLAIMED DEVICE USB Root Hub
usb 1 0/0/2/1 hcd CLAIMED INTERFACE NEC USB Interface
usbhub 1 0/0/2/1.1 hub CLAIMED DEVICE USB Root Hub
/dev/hub
usb 2 0/0/2/2 ehci CLAIMED INTERFACE NEC USB Interface
sideba 0 0/0/3/0 side_ba CLAIMED INTERFACE CMD IDE controller
ext_bus 0 0/0/3/0.0 side CLAIMED INTERFACE IDE Primary Channl
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
ctl 0 0/0/3/0.0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/3/0.1 side CLAIMED INTERFACE IDE Secondary Chal
ctl 1 0/0/3/0.1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ext_bus 2 0/1/1/0 mpt CLAIMED INTERFACE SCSI Ultra320 A691
/dev/mpt2
disk 1 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 73.4GST373454LC
/dev/dsk/c2t1d0 /dev/rdsk/c2t1d0
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/1/1/1 mpt CLAIMED INTERFACE SCSI Ultra320 A691
/dev/mpt3
disk 2 0/1/1/1.0.0 sdisk CLAIMED DEVICE HP 73.4GST373454LC
/dev/dsk/c3t0d0 /dev/rdsk/c3t0d0
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 iether CLAIMED INTERFACE HP AB352-60001 PCe
lan 1 0/1/2/1 iether CLAIMED INTERFACE HP AB352-60001 PCe
lan 2 0/2/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 3 0/2/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 4 0/2/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 5 0/2/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCr
fc 0 0/4/2/0 td CLAIMED INTERFACE HP Tachyon XL2 Fir
/dev/td0
fc 1 0/5/2/0 td CLAIMED INTERFACE HP Tachyon XL2 Fir
/dev/td1
lan 6 0/6/1/0/4/0 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 7 0/6/1/0/4/1 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 8 0/6/1/0/6/0 iether CLAIMED INTERFACE HP AB545-60001 PCr
lan 9 0/6/1/0/6/1 iether CLAIMED INTERFACE HP AB545-60001 PCr
ipmi 0 16 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi

Can help me? need a driver ?
Thanks to all

Re: Eva 3000

Ivan Ferreira — Fri, 26 May 2006 10:29:21 GMT

Do you have the host (HBA) configured in the EVA? Is the right OS Type set?

Have you presented the Virtual Disk to the host?

Did you check your zoning configuration in the switches (if used)?

Re: Eva 3000

HDgio — Fri, 26 May 2006 10:34:41 GMT

Hy thanks for reply
I have presented the lun to the host from command view, configured the HBA and installed a driver for A6295A.

ps: my HP-UX is a foundation

Re: Eva 3000

peter carpenter_1 — Fri, 26 May 2006 10:41:28 GMT

Check your san zoning, also what does spmgr display show?

Re: Eva 3000

Ivan Ferreira — Fri, 26 May 2006 10:54:03 GMT

When you configured the host, did you selected the HBA number from the dropdown or typed it in manually?

If you can connect to your switch, use:

switchshow

And ensure that all ports are online and you can see the WWID of the HBAs.

cfgshow

Check your zoning configuration

topic Re: Eva 3000 in Operating System - HP-UX

Eva 3000

Re: Eva 3000

Re: Eva 3000

Re: Eva 3000

Re: Eva 3000