Configuring Additional LAN Card

Steve Yeats — Thu, 14 Jun 2001 11:53:54 GMT

Can someone help me configure an additional LAN card in my C3600.

The box was running 10.20 and has been upgraded to 11.00, but I cannot get the additional interface to run. I think I may need to install a driver. I have listed below the output I'm getting from various cmds, on my 11 box and my other C3600 of the same spec which is running 10.20 still.

Any assistance appreciated.

-Steve

11.00

# ioscan -C lan -f
Class I H/W Path Driver S/W State H/W Type Description
====================================================================
lan 0 10/0/12/0 btlan3 CLAIMED INTERFACE PCI Ethernet (10110019)
lan 1 10/4/3/0 btlan UNCLAIMED UNKNOWN PCI Ethernet (10110019)
# ls -la /dev/lan*
crw-r--r-- 1 root sys 72 0x000077 Jun 4 19:10 /dev/lan
crw------- 1 root root 78 0x000000 Jun 6 00:44 /dev/lan0
crw-rw-rw- 1 bin bin 15 0x010000 Jun 4 19:10 /dev/lan1
# ls -l /dev/ether*
crw-rw-rw- 1 bin bin 77 0x000001 Jun 4 19:20 /dev/ether0
crw-rw-rw- 1 bin bin 15 0x010001 Jun 4 19:10 /dev/ether1
# lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
10/0/12/0 0x001089FFF679 0 UP lan0 snap0 1 ETHER Yes 119
#

10.20

# ioscan -C lan -f
Class I H/W Path Driver S/W State H/W Type Description
====================================================================
lan 0 10/0/12/0 btlan3 CLAIMED INTERFACE PCI(10110019) -- Built-in #4
lan 1 10/4/3/0 btlan5 CLAIMED INTERFACE PCI(10110019) -- 3
# ls -la /dev/lan*
crw-rw-rw- 1 root root 114 0x000000 Aug 30 2000 /dev/lan0
derdbln1# ls -l /dev/ether*
crw-rw-rw- 1 root root 114 0x000001 Aug 30 2000 /dev/ether0
# lanscan
Hardware Station Crd Hardware Net-Interface NM MAC HP DLPI Mjr
Path Address In# State NameUnit State ID Type Support Num
10/0/12/0 0x001083FF3F70 0 UP lan0 UP 4 ETHER Yes 114
10/4/3/0 0x001083FBA648 1 UP lan1 UP 5 ETHER Yes 130
#

Re: Configuring Additional LAN Card

Vincenzo Restuccia — Thu, 14 Jun 2001 11:59:42 GMT

s700_800 11.00 LAN product cumulative patch(PHNE_21217)

Re: Configuring Additional LAN Card

Bill McNAMARA_1 — Thu, 14 Jun 2001 12:01:01 GMT

Yes you need a driver in the kernel for that card.
A state of unclaimed in the ioscan means that no driver is claiming the card. The problem now is to find the driver for the card.
It's time to root around..

Bill

Re: Configuring Additional LAN Card

Ravi_8 — Thu, 14 Jun 2001 12:12:22 GMT

steve

ioscan status shows that the interface has not been claimed, since it couldn't find the driver for that, so install the particular driver for that interface which will be in os cd.

Re: Configuring Additional LAN Card

Steve Yeats — Thu, 14 Jun 2001 13:00:04 GMT

Thanks for the replies.

Per Vincenzo. Will install PHNE_22962 patch, supercedes one he suggested. Will let you all know how I get on.

topic Re: Configuring Additional LAN Card in Operating System - HP-UX

Configuring Additional LAN Card

Re: Configuring Additional LAN Card

Re: Configuring Additional LAN Card

Re: Configuring Additional LAN Card

Re: Configuring Additional LAN Card