topic Re: Hp-UX 11i Booting problem in Operating System - HP-UX

Hp-UX 11i Booting problem

Subhash_5 — Sat, 03 Jun 2006 06:32:45 GMT

We are having HP RP5405 server & when we are booting it its giving message /sbin/rc2.d/S998vgenable /sbin/vgchnage :not found.
what may be this issue. i can go to single user mode & can see all the disks.
Please advice.
system is not booting.

Re: Hp-UX 11i Booting problem

Arunkumar.B — Sat, 03 Jun 2006 06:58:52 GMT

HI Subash,

Can u pls send us the /etc/rc.log & the /sbin/rc2.d/S998vgenable script.Pls tell us where its stopping in Multiuser MOde

With Cheers
Arunkumar.B

Re: Hp-UX 11i Booting problem

Luk Vandenbussche — Sat, 03 Jun 2006 07:22:30 GMT

Hi,

There is a typing error in S998vgenable

It must be /sbin/vgchange instead op /sbin/vgchnage

Modify your script.

Re: Hp-UX 11i Booting problem

Ninad_1 — Sat, 03 Jun 2006 07:25:34 GMT

Hi,

You have mentioned "when we are booting it its giving message /sbin/rc2.d/S998vgenable /sbin/vgchnage :not found" If the vgchnage in your post is not a typing mistake then please check your S998vgenable script and correct the vgchnage to vgchange
If you have typed in the post incorrectly then check ls -l /sbin/vgchange.
I suspect your script has vgchange misspelled.

Regards,
Ninad

Re: Hp-UX 11i Booting problem

Michael Steele_2 — Sat, 03 Jun 2006 07:47:38 GMT

I would also like to see the rc.log. Also can you paste in the display messages?

And try this procedure fron single user mode:

# sh -x /etc/rc.config

This debug command of rc.config should be capture to a file.

Re: Hp-UX 11i Booting problem

Subhash_5 — Sat, 03 Jun 2006 08:02:22 GMT

Hello all
that was typing mistake.in /sbin there is vgchange commnad.
Also when i am booting in single user mode & try to mount lv's i get error /usr/lib/sdl.so ERROR XXX.
after setting PATH=$PATH:/usr/lib: i can boot the system but i reboot agian it comes to same stage & stops.
what may be the issue.
please advice.
many thanks in advance.

Re: Hp-UX 11i Booting problem

Michael Steele_2 — Sat, 03 Jun 2006 14:28:11 GMT

Need to see the error logs. /etc/rc.log, GSP=> sl => e ( for error ) any attn lights?

Re: Hp-UX 11i Booting problem

Michael Steele_2 — Sat, 03 Jun 2006 14:28:54 GMT

Need to see the GSP and rc.log.

GSP > sl > e

Re: Hp-UX 11i Booting problem

Mridul Shrivastava — Sun, 04 Jun 2006 11:22:59 GMT

Have any changes been made to the server recently. I would suggest you to check the current patch level. If possible run patch assessment
1) open the page ==> http://www1.itrc.hp.com/service/patch/assessSystemsPage.do?BC=main|
2) click on "select a system to assess or upload new system information"
3) Download the script "swainv ". Right click on this and save to the system
4) Transfer this file to the HP-UX system. If ftp is used, then select binary mode of transfer.
5) Go to the directory in HP-UX system where the script "swainv " is loaded and give the executable permission by using the command " chmod 700 swainv "
6) Execute the script as " ./swainv "
7) This will generate a file called "inventory.xml" in current directory.
8) Transfer the file to the system which has got access to ITRC site.
9) Use the above link " http://www1.itrc.hp.com/service/patch/assessSystemsPage.do?BC=main " again and upload the "inventory.xml" to ITRC by clicking "submit".
10) click on " display candidate patches". The site will give the recommendations.
11) click on "create assessment report". This will give consolidated report.
12) Check at the line " Patches recommended by InstalledPatchAnalyzer (summary)" for recommendations.

Re: Hp-UX 11i Booting problem

V. Nyga — Mon, 12 Jun 2006 08:32:04 GMT

Hi,

also:
check /etc/PATH and add '/usr/lib' to it.

HTH
Volkmar