topic Re: Diagnostics in Operating System - HP-UX

Diagnostics

Mihails Nikitins — Mon, 31 Jul 2006 08:51:06 GMT

How to restart all hardware diagnostic daemons without restarting the entire host (HP-UX 11.11)?

Some daemons (like diagmond) died and I can't restart them.

Thanks and points in advance!

Re: Diagnostics

James R. Ferguson — Mon, 31 Jul 2006 08:53:35 GMT

Hi:

# /sbin/init.d/diagnostic stop
# /sbin/init.d/diagnostic start

Regards!

...JRF...

Re: Diagnostics

Torsten. — Mon, 31 Jul 2006 08:54:09 GMT

Run

/sbin/init.d/diagnostic start

Re: Diagnostics

Jaime Bolanos Rojas. — Mon, 31 Jul 2006 08:56:46 GMT

Mihails,

This thread will help you out,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1004110

Regards,

Jaime.

Re: Diagnostics

DCE — Mon, 31 Jul 2006 09:01:10 GMT

After you issue the stop command,

do a ps -ef | grep stm

If there are any processes running - kill them with the kill command.

Then issue the start command.

The stop command does does not always stop ALL of the processes, which causes a failure at the restart.

HTH
Dave

Re: Diagnostics

Mihails Nikitins — Mon, 31 Jul 2006 09:03:38 GMT

diagmond is not running after "disagnostic start"

Re: Diagnostics

Jaime Bolanos Rojas. — Mon, 31 Jul 2006 09:08:52 GMT

Mihails,

Please run this command in your system

stmstart.diag.sys

and for some more troubleshooting steps take a look at this thread,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=562069

Regards,

Jaime

Re: Diagnostics

James R. Ferguson — Mon, 31 Jul 2006 09:13:52 GMT

Hi (gain) Mihails:

Make sure that:

# DIAGNOSTICS=1

...in '/etc/rc.config.d/diagnostic' .

Regards!

...JRF...

Re: Diagnostics

Mihails Nikitins — Mon, 31 Jul 2006 09:35:10 GMT

Nothing brings diagmond up.

Re: Diagnostics

Bill Hassell — Mon, 31 Jul 2006 14:48:57 GMT

You probably have some corruption in the diagnostic subsystem and may need the latest version. I would download the latest diag package and update it to the latest version. That should clear the problem. Latest diags from:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Re: Diagnostics

Mihails Nikitins — Tue, 01 Aug 2006 00:31:42 GMT

Bill, I had the problem on two cluster nodes, I doubt that both system are corrupted. Anyway, I've restarted the node and it's healthy again.