https://community.hpe.com/t5/operating-system-hp-ux/swap-problem-at-boot/m-p/2545026#M27235 <BR /><BR />take a look at /etc/lvmrc<BR /><BR />there you can set which vg groups should be activated at boot time<BR /><BR /> Tue, 26 Jun 2001 06:55:54 GMT Rainer von Bongartz 2001-06-26T06:55:54Z https://community.hpe.com/t5/operating-system-hp-ux/swap-problem-at-boot/m-p/2545025#M27234 Hi all,<BR />I added ram on 2 cluster nodes and so I added swap space.<BR />On each node I created a vg and a lv for swap and activated. <BR />But when I reboot the secondary swap is not enabled end in the /etc/rc.log the error is:<BR /><BR />/usr/sbin/swapon: /dev/vgswap/swap: No such device or address<BR /><BR />the line in /etc/fstab is<BR /><BR />/dev/vgswap/swap ... swap pri=0 0 2<BR /><BR />The vgswap is not on service guard: there's a vg on each node.<BR /><BR />So, I have to do<BR />vgchange -a y<BR />swapon -a<BR />to enable the swap.<BR /><BR />What's wrong? Anybody can help me?<BR /><BR />Regards<BR /><BR />Roberto Tue, 26 Jun 2001 06:42:33 GMT https://community.hpe.com/t5/operating-system-hp-ux/swap-problem-at-boot/m-p/2545025#M27234 Roberto Gallis 2001-06-26T06:42:33Z https://community.hpe.com/t5/operating-system-hp-ux/swap-problem-at-boot/m-p/2545026#M27235 <BR /><BR />take a look at /etc/lvmrc<BR /><BR />there you can set which vg groups should be activated at boot time<BR /><BR /> Tue, 26 Jun 2001 06:55:54 GMT https://community.hpe.com/t5/operating-system-hp-ux/swap-problem-at-boot/m-p/2545026#M27235 Rainer von Bongartz 2001-06-26T06:55:54Z