https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859789#M276571 check them under /proc/scsi<BR /><BR />if it is already connected and then check it using fdisk Sat, 09 Sep 2006 14:22:02 GMT IT_2007 2006-09-09T14:22:02Z https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859788#M276570 I have connected My Linux box and MSL 6000 series library using san switches. How can i verify from linux whether the drives are getting detected like in HP UX we can use ioscan -fnC tape. any help will be appreciated<BR /> Sat, 09 Sep 2006 06:43:01 GMT https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859788#M276570 suresh_k 2006-09-09T06:43:01Z https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859789#M276571 check them under /proc/scsi<BR /><BR />if it is already connected and then check it using fdisk Sat, 09 Sep 2006 14:22:02 GMT https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859789#M276571 IT_2007 2006-09-09T14:22:02Z https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859790#M276572 Hi Suresh,<BR /><BR />Check status of drive,<BR /><BR />mt -f /dev/st0 status<BR /><BR /> Sun, 10 Sep 2006 02:32:16 GMT https://community.hpe.com/t5/operating-system-hp-ux/msl-6000-issue/m-p/3859790#M276572 sajeer_2 2006-09-10T02:32:16Z