topic Re: SNMP problem in Operating System - HP-UX

SNMP problem

chuanpeng_1 — Mon, 23 Oct 2006 04:16:22 GMT

The customer want to collect the information about memory, CPU, etc on the HPUX server via SNMP agent. His SNMP server is mg-soft.
Now, he can find the information about network of the HPUX server and all the information about windows server.
Is there some configuration on the HPUX about this?
Someone tell me that he should download mib2 from internet. But I don't know how to use it.
Please help me. Thanks.

Re: SNMP problem

Calandrello — Mon, 23 Oct 2006 07:07:15 GMT

Friend if you to use the version that this in the site of the HP: www.software.hp.com (version comes in format .depot) or the version that this in the site: http://www.net-snmp.org/ (this sera necessary to compile) sera the necessity not to make download of the MIBII is enough to configure and to use.

Re: SNMP problem

Jaime Bolanos Rojas. — Mon, 23 Oct 2006 07:31:07 GMT

Chuanpeng!

You should consider using System Insight Manager from HP, is free to downlaod and easy to use.

http://h18013.www1.hp.com/products/servers/management/hpsim/

Regards,

Jaime.

Re: SNMP problem

Yang Qin_1 — Mon, 23 Oct 2006 08:06:36 GMT

You can find HP-Unix MIBs in the following link:
http://www.mibdepot.com/xsearch_index3.html?id=145636

You do not need to install anything if the following commands generate some ouput (huge amount of data, you can interrupt the command with ctl-c) on your HPUX server
snmpwalk -Os -c public -v 1 server_name 1.3.6.1.4.1.11.2.3

Yang

Re: SNMP problem

chuanpeng_1 — Mon, 23 Oct 2006 08:50:51 GMT

Thanks Calandrello, Jaime and Yang Qin.

to Calandrello:
Can you tell me more detail about that?

to Jaime:
It is a good suggestion, but I don't know whether the customer agree with or not.

to yang qin
I can't find the command snmpwalk on the system. Is it a system command in HPUX?

Re: SNMP problem

Calandrello — Mon, 23 Oct 2006 13:13:20 GMT

chuanpeng

If you to use the version that this in the site of the HP: www.software.hp.com you anger to make download of an archive .depot for its version of HP-UX, being necessario the compilation are not only enough to execute swinstall -s /tmp/xxx.depot and it anger to install the package of the SNMP. case you uses the version of the site: http://www.net-snmp.org/ you go to have that to the same compile for the installation, using the command make. In the two versions you can configure the SNMP with the command: snmpconf, this command anger to allow you to configure community and version of the SNMP that it desires to use, traps etc.
how much to snmpwalk it not and a native command, it together with comes the installation of the SNMP therefore belongs to the SNMP-tools package. The two versions that I indicated it ja comes with this command.

Re: SNMP problem

Yang Qin_1 — Mon, 23 Oct 2006 17:21:59 GMT

You can get net-snmp binary for HP-UX from:
http://sourceforge.net/project/showfiles.php?group_id=12694&package_id=162885&release_id=431951

If your customer does not want to install it on Unix server, you can get one for windows.

Yang