topic Re: Error message table HPUX in Operating System - HP-UX

Error message table HPUX

Ganaa — Mon, 11 Dec 2006 01:28:19 GMT

HI all,
I'm used for HP-UX operting system on HP-Stratus server.
Sometime server shows error and warning messages on /var/adm/syslog.

Do you have any document that is explained HP-UX system log messages ? ? ? .

Re: Error message table HPUX

Fabian Briseño — Mon, 11 Dec 2006 01:58:30 GMT

Hello Ganaa.
There are lots of error messages out there, too many to keep track of.

What error error message is your server displaying ?.

I don't know of any manual that explains syslog error messages.

Re: Error message table HPUX

Andrew Merritt_2 — Mon, 11 Dec 2006 06:08:24 GMT

Hi Ganaa,
Sorry, there is no complete list of all the messages, partly because any application may log there, and I don't think HP documents even just the kernel ones (new ones could be added at any time, anyway).

What is it you need to know for? Most messages should be reasonably self-explanatory, if it's understanding them that's the issue. If they are not clear, contact HP support to let them know and ask their assistance

Andrew

Re: Error message table HPUX

Bill Hassell — Mon, 11 Dec 2006 08:12:53 GMT

AS mentioned, syslog can contain messages from dozens of different sources including your own messages using the logger program. Although some mainframe computer systems provide message catalogs, even these tend to become outdated with patches or add-ons. The best source for decoding the various messages is to look in the ITRC knowledge base. Note that without a software support contract, only a subset of the papers and technical notes are visible. With a software contract, you'll not only see all the articles but also the ability to talk to an HP engineer to decode any of the messages.

Re: Error message table HPUX

Ganaa — Mon, 11 Dec 2006 21:12:58 GMT

Our server displaying following messages.

*******************************************
Nov 15 03:38:46 stratus1 vmunix: SRA[DUP,c0] (0/0) Pairing complete.
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Board Broken, warm reset given
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Reset = 0x8, IFault = 0x3030303, ErrByte = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) ControlErr = 0x0, Misc = 0x8000800, InfoErr = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) ASIC = 0xd050d05, Common = 0x0, IState = 0x84110e
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Test = 0x0, Voter = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Giving Cold Reset after salvaging registers
Nov 15 04:10:04 stratus1 vmunix: SRA[FTS,c1] (0/0) fts_handle_disable: old_fault_code = 0, flags = 0x0 code = 0
Nov 15 04:10:05 stratus1 vmunix: SRA[FTS,c1] (0/0) Disabling Device on Maintenace Fault
Nov 15 04:10:05 stratus1 vmunix: SRA[FTS,c1] (0/0) Disabling
Nov 15 04:10:51 stratus1 vmunix: SRA[FTS,c0] (0/0) turning red_light on
Nov 15 04:10:51 stratus1 vmunix: SRA[FTS,c0] (0/0) MTBF Acceptable, (re)enabling
Nov 15 04:11:38 stratus1 vmunix: SRA[FTS,c0] (0/0) Enabling
Nov 15 04:12:25 stratus1 vmunix: SRA[FTS,c0] (0/0) turning red_light off
Nov 15 04:12:26 stratus1 vmunix: SRA[DUP,c1] (0/0) Bringing up pair (0)
Nov 15 04:15:44 stratus1 vmunix: SRA[DUP,c0] (0/0) Pairing complete.
*********************************************

Re: Error message table HPUX

Ganaa — Mon, 11 Dec 2006 21:26:40 GMT

Fault tolerant services installed our server.

Server displaying following messages.

*******************************************
Nov 15 03:38:46 stratus1 vmunix: SRA[DUP,c0] (0/0) Pairing complete.
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Board Broken, warm reset given
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Reset = 0x8, IFault = 0x3030303, ErrByte = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) ControlErr = 0x0, Misc = 0x8000800, InfoErr = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) ASIC = 0xd050d05, Common = 0x0, IState = 0x84110e
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Test = 0x0, Voter = 0x0
Nov 15 04:09:28 stratus1 vmunix: SRA[FTS,c1] (0/0) Giving Cold Reset after salvaging registers
Nov 15 04:10:04 stratus1 vmunix: SRA[FTS,c1] (0/0) fts_handle_disable: old_fault_code = 0, flags = 0x0 code = 0
Nov 15 04:10:05 stratus1 vmunix: SRA[FTS,c1] (0/0) Disabling Device on Maintenace Fault
Nov 15 04:10:05 stratus1 vmunix: SRA[FTS,c1] (0/0) Disabling
Nov 15 04:10:51 stratus1 vmunix: SRA[FTS,c0] (0/0) turning red_light on
Nov 15 04:10:51 stratus1 vmunix: SRA[FTS,c0] (0/0) MTBF Acceptable, (re)enabling
Nov 15 04:11:38 stratus1 vmunix: SRA[FTS,c0] (0/0) Enabling
Nov 15 04:12:25 stratus1 vmunix: SRA[FTS,c0] (0/0) turning red_light off
Nov 15 04:12:26 stratus1 vmunix: SRA[DUP,c1] (0/0) Bringing up pair (0)
Nov 15 04:15:44 stratus1 vmunix: SRA[DUP,c0] (0/0) Pairing complete.
*********************************************

Thanks all,
Ganaa

Re: Error message table HPUX

Andrew Merritt_2 — Tue, 12 Dec 2006 04:07:35 GMT

Hi Ganaa,
I'm almost certain those are Stratus specific log messages, so HP wouldn't have those documented anyway. I think you need to check the Stratus documentation or talk to your Stratus support contact. Sorry not to be able to help more.

Andrew

Re: Error message table HPUX

Bill Hassell — Tue, 12 Dec 2006 09:06:55 GMT

You likely have a hardware problem and you'll have to contact Stratus service to fix it.

Re: Error message table HPUX

Ganaa — Tue, 12 Dec 2006 20:17:46 GMT

Thank you for your all reply.
Ganaa