topic Re: config APA. in Operating System - HP-UX

config APA.

chuanpeng.wang — Thu, 21 Dec 2006 05:29:27 GMT

There is 4 lan cards in system.
They have configured the APA successfully, then they delete the configuration, and reconfig the APA.

When add the lan2 to the APA, return error message like follow:
the port 2 is already in link Agg.

Re: config APA.

Steven E. Protter — Thu, 21 Dec 2006 07:57:38 GMT

Shalom,

Check /var/adm/syslog/syslog.log for any loss of network card or similar message. Also post the error message, it would be helpful with the diagnosis.

SEP

Re: config APA.

A.Vishwanath_2 — Fri, 22 Dec 2006 06:31:38 GMT

Please examine the "Ethernet Port" settings on the Network Switch. Make sure that the two ports form a group depending on the type of Aggregation protocol you are using. After this unconfigure the APA & all the entries related to these LAN interfaces. Configure from scratch you should be able to do that. It would also be intresting to know on the type of "Aggregation" protocol you are using in the Ethernet Switch.

Re: config APA.

Rashid Hamid — Tue, 26 Dec 2006 02:50:56 GMT

May be you need to delete all configuration, and create it back from scratch.