topic display problems. in Operating System - HP-UX

display problems.

aruns_s — Thu, 28 Dec 2006 08:57:53 GMT

Hi All,
I am getting following errors whilst trying to start XTERM.
xterm Xt error: Can't open display: %s .

Same erros while running Xomni.-
Wind/U X-toolkit Error: wuDisplay: Can't open display .

I have exported the display variable.
Please advise.

Thanks in advance

Re: display problems.

Mark Nieuwboer — Thu, 28 Dec 2006 09:14:23 GMT

Hi arun,

see this thread.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1052941

grtz. Mark

Re: display problems.

Yarek — Thu, 28 Dec 2006 10:06:49 GMT

hi,

'xhost' command could be the solution

rgds.

Re: display problems.

Yarek — Thu, 28 Dec 2006 10:10:38 GMT

hi,

'xhost' command could be the solution

If you use X11 tunnelling via SSH protocol, check also ssh configuration

rgds.

Re: display problems.

skt_skt — Thu, 28 Dec 2006 10:59:57 GMT

you need to have the xterm/xomin software installed.Hope u have that..

Where r u trying to export it?
Then you need to have a Xprogram like Reflection X running.