install BL60P

chuanpeng.wang — Fri, 12 Jan 2007 05:13:09 GMT

Install BL60P failed.
The error message:

Loaded ACPI revision 2.0 tables.
krs_read_mfs: Error 5 opening MFS.
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read error.
ioconfig = NULL
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
asio0_init: unexpected SAS subsystem ID (132a)

System Console is on the Built-In Serial Interface
igelan2: INITIALIZING HP PCI/PCI-X 1000Base-T Adapter at hardware path 0/3/3/0
igelan3: INITIALIZING HP PCI/PCI-X 1000Base-T Adapter at hardware path 0/3/3/1
igelan0: INITIALIZING HP PCI/PCI-X 1000Base-T Adapter at hardware path 0/3/1/0
igelan1: INITIALIZING HP PCI/PCI-X 1000Base-T Adapter at hardware path 0/3/1/1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - no room

WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
Starting the STREAMS daemons-phase 1
execve("/sbin/sh") failed, errno 0xffffffff
execve("/bin/sh") failed, errno 0xffffffff

* Checking configuration for consistency...
ERROR: parser cannot open file: /var/opt/ignite/INDEX: No such file or
directory (errno = 2)
ERROR: net_cfg_prep: Problems were encountered while parsing configuration
file: "/var/opt/ignite/INDEX". See the messages above for details.
Using instl_adm with the -T and/or -D options on the server may help
isolate the problem. (See instl_adm(1M) and instl_adm(4) man pages.)

* Loading configuration user interface, please wait...
ERROR: Tar: blocksize = 0; broken pipe?
ERROR: File: /usr/ccs not found.
ERROR: File: /usr/obam not found.
ERROR: File: /usr/lib/nls not found.
ERROR: File: /usr/lib/hpux32/aries32.so not found.
ERROR: File: /usr/lib/hpux32/pa_boot32.so not found.
ERROR: File: /usr/lib/libdld.2 not found.

* Scanning system for IO devices...
* Querying disk device: 0/1/1/0.0.0 ...
* Querying disk device: 0/1/1/0.1.0 ...
ERROR: could not find source device "" in ioscan output. You must select
from the list of devices below to use for the source device:
index HW-path Class description
0) 0/1/1/0 ext_bus SCSI_Ultra320
1) 0/1/1/0.0.0 disk COMPAQ_BF03688284
2) 0/1/1/0.1.0 disk COMPAQ_BF03688284
3) 0/3/1/0 lan HP_PCI/PCI-X_1000Base-T_Adapter
4) 0/3/1/1 lan HP_PCI/PCI-X_1000Base-T_Adapter
5) 0/3/3/0 lan HP_PCI/PCI-X_1000Base-T_Adapter
6) 0/3/3/1 lan HP_PCI/PCI-X_1000Base-T_Adapter
7) 0/0/1/0 usb NEC_USB_Interface
8) 0/0/1/1 usb NEC_USB_Interface
9) 0/0/1/2 usb NEC_USB_Interface
10) 120 processor Processor

Re: install BL60P

Steven E. Protter — Fri, 12 Jan 2007 06:17:14 GMT

Shalom,

It would be helpful to have a more detailed explanation of what you were trying to do.

I will now consult my crystal ball.

Ideas:
1) You tried to do an ignite image to a blade hp-ux server and the image didn't come from a blade server. The hardware was so radically different there was no hope it would work. Think about Golden Images.

2)You tried to do an Ignite boot and for networking reasons the connect failed and the Ignite archive was never reached on the Ignite server. Check network configuration.

Those are my guesses. Care to make it easier to help you?

Thanks,

SEP

Re: install BL60P

chuanpeng.wang — Sun, 14 Jan 2007 21:43:29 GMT

I want to install BL60P from USB DVD.

topic Re: install BL60P in Operating System - HP-UX

install BL60P

Re: install BL60P

Re: install BL60P