topic Re: Error when trying to configure bash 3.0 in Operating System - HP-UX

Error when trying to configure bash 3.0

NOreen Merrick — Wed, 17 Jan 2007 11:32:33 GMT

Hi I am trying to configure bash on hp-ux 11.0 and keep getting the following

# ./configure
configure: error: cannot find sources (shell.h) in . or ..

same when I do

# sh ./configure
configure: error: cannot find sources (shell.h) in . or ..

or
/sbin/sh is the same

I have nothing installed on this system yet.

Thanks

noradanjo

Re: Error when trying to configure bash 3.0

A. Clay Stephenson — Wed, 17 Jan 2007 11:50:01 GMT

Well are the source files in your current working directory?

Re: Error when trying to configure bash 3.0

NOreen Merrick — Wed, 17 Jan 2007 11:58:26 GMT

Hi A Clay,
i only have shell.c in the pwd where do I get shell.h?

Thnks

Nora

Re: Error when trying to configure bash 3.0

NOreen Merrick — Wed, 17 Jan 2007 12:14:51 GMT

Hi A Clay,

I realised what happened, yesterday when I did the install I filled the file system to 100% so it obviously didnt install correctly so have extended and installed agian, the configure works now so will continue on.

Regards,

Nora

Re: Error when trying to configure bash 3.0

Jaime Bolanos Rojas. — Wed, 17 Jan 2007 12:18:16 GMT

Noreen,

Hmmm, it should there, if it's not there, other solution might be copying it from the web and testing with it...

http://iep.water.ca.gov/d/bin/sbin/site/etc/httpd/cgi-bin/dss/bin/sbin/site/src/gnu/bash-2.0/shell.h

Regards,

Jaime.

Re: Error when trying to configure bash 3.0

A. Clay Stephenson — Wed, 17 Jan 2007 12:25:18 GMT

By the way, whatever you do do not change root's shell to bash. In fact, leave it as /sbin/sh because it is a statically linked but full functional version of the POSIX shell. Statically linked executables are less memory efficient than their dynamically linked counterparts but are able to run as standalone executables. If you change root's shell to bash or /usr/bin/shell then it cannot execute until /usr is mounted and /usr cannot be mounted until the shell executes the mount mount and the ... .

I hope that you have a compelling reason to use bash. One of my least favorite features of most implementations of bash is that the following very useful construct does not work:

echo "One Two Three" | read A B C

but works perfectly with the POSIX or Korn shell.

Re: Error when trying to configure bash 3.0

NOreen Merrick — Wed, 17 Jan 2007 12:33:59 GMT

Hi A Clay,

I did the following and still haev no bash. Is this the expected output?

# make
making ./lib/intl/libintl.a in ./lib/intl
cc -c -DLOCALEDIR=\"/usr/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/usr/local/share/locale\" -DLIBDIR=\"/usr/local/libdata\" -DIN_LIBINTL -DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"/usr/local/lib\" -DNO_XMALLOC -Dset_relocation_prefix=libintl_set_relocation_prefix -Drelocate=libintl_relocate -DDEPENDS_ON_LIBICONV=1 -DHAVE_CONFIG_H -I. -I. -I/home/bash/bash-3.0 -I../.. -g bindtextdom.c
(Bundled) cc: warning 480: The -g option is available only with the C/ANSI C product; ignored.
cpp: "libgnuintl.h", line 301: error 4065: Recursion in macro "libintl_set_relocation_prefix".
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.
# make tests
making ./lib/intl/libintl.a in ./lib/intl
cc -c -DLOCALEDIR=\"/usr/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/usr/local/share/locale\" -DLIBDIR=\"/usr/local/libdata\" -DIN_LIBINTL -DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"/usr/local/lib\" -DNO_XMALLOC -Dset_relocation_prefix=libintl_set_relocation_prefix -Drelocate=libintl_relocate -DDEPENDS_ON_LIBICONV=1 -DHAVE_CONFIG_H -I. -I. -I/home/bash/bash-3.0 -I../.. -g bindtextdom.c
(Bundled) cc: warning 480: The -g option is available only with the C/ANSI C product; ignored.
cpp: "libgnuintl.h", line 301: error 4065: Recursion in macro "libintl_set_relocation_prefix".
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.
# make install
making ./lib/intl/libintl.a in ./lib/intl
cc -c -DLOCALEDIR=\"/usr/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/usr/local/share/locale\" -DLIBDIR=\"/usr/local/libdata\" -DIN_LIBINTL -DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"/usr/local/lib\" -DNO_XMALLOC -Dset_relocation_prefix=libintl_set_relocation_prefix -Drelocate=libintl_relocate -DDEPENDS_ON_LIBICONV=1 -DHAVE_CONFIG_H -I. -I. -I/home/bash/bash-3.0 -I../.. -g bindtextdom.c
(Bundled) cc: warning 480: The -g option is available only with the C/ANSI C product; ignored.
cpp: "libgnuintl.h", line 301: error 4065: Recursion in macro "libintl_set_relocation_prefix".
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.
#

Thanks

Noreen

Re: Error when trying to configure bash 3.0

A. Clay Stephenson — Wed, 17 Jan 2007 12:39:04 GMT

You are trying to build bash with the Bundled c compiler. It only understands K&R C syntax and is really only intended for building kernels. You need to install a real development system, either ANSI C or aCC (C++) from HP OR gcc (free) in order to build the shell.

Re: Error when trying to configure bash 3.0

NOreen Merrick — Thu, 18 Jan 2007 06:11:44 GMT

Hi A Clay,

I have installed gcc now

# find / -name gcc -print 2>/dev/null
/usr/local/bin/gcc
/var/adm/sw/products/gcc

But when I did ./configure I noticed when it checked for gcc it returned "no" in output. And when I do make I still get

# make
making ./lib/intl/libintl.a in ./lib/intl
cc -c -DLOCALEDIR=\"/usr/local/share/locale\" -DLOCALE_ALIAS_PATH=\"/usr/local/share/locale\" -DLIBDIR=\"/usr/local/libdata\" -DIN_LIBINTL -DENABLE_RELOCATABLE=1 -DIN_LIBRARY -DINSTALLDIR=\"/usr/local/lib\" -DNO_XMALLOC -Dset_relocation_prefix=libintl_set_relocation_prefix -Drelocate=libintl_relocate -DDEPENDS_ON_LIBICONV=1 -DHAVE_CONFIG_H -I. -I. -I/home/bash/bash-3.0 -I../.. -g bindtextdom.c
(Bundled) cc: warning 480: The -g option is available only with the C/ANSI C product; ignored.
cpp: "libgnuintl.h", line 301: error 4065: Recursion in macro "libintl_set_relocation_prefix".
*** Error exit code 1

Why is bash not recognising that I have installed gcc?

THanks

Noreen

Re: Error when trying to configure bash 3.0

NOreen Merrick — Tue, 23 Jan 2007 05:31:58 GMT

Hi,

Does anyone have any further ideas on this problem, am still stuck, trying to install bash 3.0 on hp-ux 11.0 but keep having problems when running the configure script complaining about lack of a compiler which prompted me to download and install gcc but still problems see above.

Regards,

Noradanjo

Re: Error when trying to configure bash 3.0

Dennis Handly — Tue, 23 Jan 2007 06:04:22 GMT

You have to tell make or configure to use gcc to compile, not cc. I assume that gcc must be in your path.

Re: Error when trying to configure bash 3.0

NOreen Merrick — Tue, 23 Jan 2007 09:59:55 GMT

Hi Dennis,

yes I did this and now I realise that I need other binaries that are contained in the gnu binutils package (i think) for gcc to work properly. So I have downloaded this package and trying to install 2.9.1.

But when I do "make" am getting

"In file included from hpux-core.c:35:
/usr/include/sys/core.h:81: parse error before `uint64_t'
/usr/include/sys/core.h:81: warning: no semicolon at end of struct or union
hpux-core.c: In function `hpux_core_core_file_p':
hpux-core.c:140: storage size of `proc_info' isn't known
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.
#"
I'll look this up now.

God I thought installing and configuring bash would be easy but looks like I need a tonne of things to make bash work anyway which I haven't already got. Do you know if this is the normal procedure for installation or is there some other "packaged and compiled file" that would have everything I need.

Thanks

Noreen

Re: Error when trying to configure bash 3.0

Dennis Handly — Tue, 23 Jan 2007 17:07:33 GMT

>Do you know if this is the normal procedure for installation or is there some other "packaged and compiled file" that would have everything I need.

Someone else ports the few non-HP tools that I use, so I haven't experienced the pain.

I would have tought some of these are available at the porting center.